Simagic QR to 70mm Steering Wheel Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapts a Simagic/Moza QR from AliExpress to fit a standard 70mm PCD steering wheel.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 233
- Wydruki
- 0
- Wyświetlenia
- 969
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I ordered a couple of these Simagic QR adapters for my OSW Simucube wheel from AliExpress because they were dirt cheap in comparison to similar offerings and had good reviews online.
When they arrived, I realized that the Simagic/Moza wheelbases don't use a 70mm PCD to mount to the wheelbase, so I created this adapter and used M5x6x7OD brass heat inserts to mount to my OSW Simucube. I've also included the STEP file so if you need to make your own modifications it should be easy enough.
In an ADHD fuelled frenzy, clearly I forgot to take pictures of the final product, but suffice to say it works well, and it's held up to the small Mige motor forces without so much as a hiccup.
Print with 4+ walls and a high (>50%) infill for best results. I used PETG, but I think PLA would probably do just as well.