1 / 2
18650/21700 2 Bay Battery Charger Skadis Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A tight, but compliant mount for my 'fugasun' branded 18650/21700 battery charger (123mm x 65.5mm)
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 40
- Wydruki
- 1
- Wyświetlenia
- 409
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Its a super tight fit, but with good PLA you can spread both clips with your charger and snap it in place. Hole for a charger at the top and it holds super securely.
2 walls 15% crosshatch infill 3 top/bottom layers, I used PolyMaker PolyLite PLA
Use:
m3 Skadis t-nut (what I use)
https://www.printables.com/model/450444-skadis-t-nut-mounting-system-threaded-for-m3-or-un
or
original m2/m2.5 Skadis t-nut
https://www.printables.com/model/228663-skadis-t-nuts-mounting-system-for-ikea-skadis-pegb
