1 / 2
towel hanger
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Very simple towel hanger-Needs a 16 diameter glass marble (can be found at any kiddo toys shop)-Closed with superglue-…
- Ocena
- 4 / 5
- Polubienia
- 17
- Pobrania
- 62
- Wydruki
- 1
- Wyświetlenia
- 1003
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (30)Powiązane
Very simple towel hanger
-Needs a 16 diameter glass marble (can be found at any kiddo toys shop)
-Closed with superglue
-Put in place on wall with a double sided tape
Added a V2 with more thickness on the wall side (+2mm) if needed
If you liked it, feel free for a tip!(link on my page)
Print Settings
Printer Brand:
Creality
Printer:
Ender-3 v2
**Rafts:**
No
Supports:
No
**Resolution:**
any
Infill:
25
**Filament:** any PLA any
Category: Kitchen & Dining