1 / 1
SV08 Shortened Drag Chain Mounting Clip
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I had to remove 2 links of the drag chain that came with the SV08 enclosure kit due to the length of the stock cables. This prevents the Z gantry from reaching the last few mm of Z axis height without popping out the stock drag chain clip. This model is shorter by about 2 links and just enough to allow for full travel.
I made it in a hurry while the printer was in pieces waiting to be put back together, so i"m sure it could be improved.