1 / 1
SV08 Shortened Drag Chain Mounting Clip
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Slightly shorter (roughly 2 links of drag chain) mount for SV08 drag chain. Helps with stock cable length being short.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 79
- Makes
- 1
- Views
- 480
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I had to remove 2 links of the drag chain that came with the SV08 enclosure kit due to the length of the stock cables. This prevents the Z gantry from reaching the last few mm of Z axis height without popping out the stock drag chain clip. This model is shorter by about 2 links and just enough to allow for full travel.
I made it in a hurry while the printer was in pieces waiting to be put back together, so i"m sure it could be improved.