ESP32-Cam Housing (Prusacam)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Housing for an ESP-32-CAM Module With MB. Use it with Prusacam to monitor your 3d printer.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 76
- Wydruki
- 1
- Wyświetlenia
- 779
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
This is my version of a ESP32-CAM housing, i designed it so i could use a wifi antenna and make use of the ESP32-CAM-MB to provide it with power and easy to acces reset button.
the ESP32 board snaps in place, and it has an external “reset” button.
there is a mounting hole for an Wifi antenna.
i printed my version in Formfutura PLA.
you only need to glue the “Pressure plates” in place, but they arent really neccesary because the ESP-CAM board already snaps in place.
The buttons slide in a slot at both sides of the housing. (the tab that pushes the button on the PCB might need some trimming becouse of different buttons used).