Tado Bridge + POE Splitter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A single module width Tado bridge + POE splitter module for @Robert_28442's modular Pi rack
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 512
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to include the Tado Bridge into @Robert_28442's modular Pi rack without taking up more than one module's width of space, I also have a POE splitter powering my Tado Bridge and I wanted that cleanly incorporated. So this is the result.
Both are friction fit which worked well for my printer (note it may scuff your bridge a little). There is also a hole for the pairing button but not the reset, I figured if I needed to reset it taking it out wouldn't take much effort. There's also no access to the lights on the bridge from the front of the module but they are still visible if you pull out the module, as I rarely have issues with my bridge I figured this was no problem.
Here's the POE injector* I use but I'll also include a Tado Bridge only file, as well as the Fusion files for you to tweak in case you have a different setup or the generic POE splitter shape changes.
Comment on any edits you'd like to see, I'm new to Fusion so it's a learning curve for me.
*affiliate link