Lulzbot Taz 6 Y Linear Rail Mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remove the rods and replace them with MGH12H Linear Rails for the Y axis
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 299
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I will include more info later as I did in this X axis mod: https://www.printables.com/model/850220-lulzbot-taz-6-x-linear-rail-mod
These are the rails that I used:
https://a.co/d/2UxHuFp
Onshape CAD model thanks to Engineerable:
https://cad.onshape.com/documents/db1314645041f433a24b6dc3/w/6aee9c13ac54c11d09e02da0/e/b7de97fc974a48bdc73dd85b
Thanks to Lulzbot for making things open source: https://download.lulzbot.com/TAZ/
Also: https://ohai.lulzbot.com
But long story short, I used the open source model to get all the alignments correct using my own mounts that I designed.
The carriage mounts has two versions. One of the versions doesn't use the original washers that came with the rod mounts for the bed. The other carriage mount version, you can use the washers, but you have thinner walls. You can decide on what is best for your printer, so I included both :)
Also, No need to relocate or print parts for the drive belt or stepper motor. The mounts will keep all of that in the same position as it stock.