Syringe drying rack 15 - 20mm id
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A friend needs to clean and maintain a bunch of syringes, and asked for help
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 286
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution
This is the first version of a drying rack, designed to hold 20 syringes for tube feeding. After it is used for a while, it will likely be updated and adjusted. I am not sure how well the plunger rack will work in use. The barrel holder should be fine, the spacing may the only issue.
I don't like small vertical prints
- the barrels are supported by 3/16 stainless steel TIG rod with a printed support tip.
- the plunger rack is supported by ¼ threaded rod, 6mm will work fine. with 4 nuts per support.
I added 7mm holes across the bases, you can use ¼" rod to connect them together and have everything nice and stable. I currently have rubber feet under each to stop it from sliding around and lifting so there is room for the nuts supporting the plungers.