1 / 7
Zero Clearance Throat Plate for Laguna Fusion F1/F2/F3 — zdjęcie 1
1 / 7

Zero Clearance Throat Plate for Laguna Fusion F1/F2/F3

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Achieve tear-out free cuts with this custom zero clearance throat plate for your Laguna Fusion table saw.

Ocena
0 / 5
Polubienia
14
Pobrania
171
Wydruki
0
Wyświetlenia
734
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Upgrade your Laguna Fusion F1/F2/F3 table saw with this customizable 3D printed zero clearance throat plate.

  • Easy assembly: Designed to fit a standard 220x220mm print bed in two pieces for efficient printing.
  • Hardware Compatibility: Utilizes existing factory hardware from your original throat plate (if desired).
  • Fine-Tuning: Print tolerances are intentionally tight for a snug fit. For perfect fitment, consider minor scaling adjustments (+/- 0.5%) for your saw.

Detailed Assembly Guide:

  • Dry-fit both halves and adjust the back section under the 6 teeth for a smooth fit (sanding or light filing may be necessary.  I used a chisel).
  • Secure the halves permanently with superglue for a strong and reliable throat plate.
  • Ensure both halves are printed with the same orientation to minimize printer variations.
  • The 60-degree chamfer on the back teeth accounts for minor dimensional discrepancies, allowing for smooth operation.

Recommended Printing Settings:

  • Filament: PETG (stronger and cuts cleaner/safer than PLA)
  • Layer Count: 4 walls, 5 top layers
  • Infill: 20% infill (enhances rigidity and durability)
  • Layer Height: 0.2mm
  • Infill Type: Gyroid
  • Supports: Yes
  • Top Z Contact Distance: 0.1mm (This makes the undersides smoother)

Calibration and Installation:

  • Assembled throat plate should fit snugly in your table saw.
  • Remove riving knife and lower the blade to its minimum height.
  • Insert the throat plate, then slide the fence over it with a half-inch gap from the riving knife slot.
  • Always wear eye and hearing protection.
  • Slowly raise the blade through the throat plate while the saw is running.
  • Congratulations! You've created a zero clearance throat plate for improved cutting performance.


I have another version of this same throat plate with enhanced air flow.  This has a few air holes on the far side of the blade to force air through or around the blade and into the dust collector.
https://www.printables.com/model/1038933-enhanced-zero-clearance-throat-plate-for-laguna-fu

Tagi