1 / 7
Zero Clearance Throat Plate for Laguna Fusion F1/F2/F3 — image 1
1 / 7

Zero Clearance Throat Plate for Laguna Fusion F1/F2/F3

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Achieve tear-out free cuts with this custom zero clearance throat plate for your Laguna Fusion table saw.

Rating
0 / 5
Likes
14
Downloads
172
Makes
0
Views
750
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — Share Alike

Upgrade your Laguna Fusion F1/F2/F3 table saw with this customizable 3D printed zero clearance throat plate.

  • Easy assembly: Designed to fit a standard 220x220mm print bed in two pieces for efficient printing.
  • Hardware Compatibility: Utilizes existing factory hardware from your original throat plate (if desired).
  • Fine-Tuning: Print tolerances are intentionally tight for a snug fit. For perfect fitment, consider minor scaling adjustments (+/- 0.5%) for your saw.

Detailed Assembly Guide:

  • Dry-fit both halves and adjust the back section under the 6 teeth for a smooth fit (sanding or light filing may be necessary.  I used a chisel).
  • Secure the halves permanently with superglue for a strong and reliable throat plate.
  • Ensure both halves are printed with the same orientation to minimize printer variations.
  • The 60-degree chamfer on the back teeth accounts for minor dimensional discrepancies, allowing for smooth operation.

Recommended Printing Settings:

  • Filament: PETG (stronger and cuts cleaner/safer than PLA)
  • Layer Count: 4 walls, 5 top layers
  • Infill: 20% infill (enhances rigidity and durability)
  • Layer Height: 0.2mm
  • Infill Type: Gyroid
  • Supports: Yes
  • Top Z Contact Distance: 0.1mm (This makes the undersides smoother)

Calibration and Installation:

  • Assembled throat plate should fit snugly in your table saw.
  • Remove riving knife and lower the blade to its minimum height.
  • Insert the throat plate, then slide the fence over it with a half-inch gap from the riving knife slot.
  • Always wear eye and hearing protection.
  • Slowly raise the blade through the throat plate while the saw is running.
  • Congratulations! You've created a zero clearance throat plate for improved cutting performance.


I have another version of this same throat plate with enhanced air flow.  This has a few air holes on the far side of the blade to force air through or around the blade and into the dust collector.
https://www.printables.com/model/1038933-enhanced-zero-clearance-throat-plate-for-laguna-fu

Tags