Counting matching models…
I redesigned this throat plate eliminating the screw holes and lock (lock is not necessary to have). I have fine tuned the bottom feet to be the exact height to level the plate with the table saw top (you can slightly sand these feet if a…
Purchased a Delta table saw from my LHS and although the throat plate that comes standard works, it lets a LOT of dust and debris through. So, instead of plunking down big bucks for a replacement I simply made my own. And it worked!…
A zero clearance throat plate for an old portable craftsman table saw. print the pieces as they are laid out. The plug end for the hook is deliberately tight to get a snug fit after a small amount of sanding. Print instructions Print…
This is a zero clearance throat plate for Ridgid R4512 table saws. These may or may not work on R4520 saws? I believe they are the same but I do not own one to verify. Because the print is too large for most printers, it must be printed…
This clamp rack was specifically designed to hold the (outstanding) Bessey Tradesman's TGJ series F clamps with a 2.5" throat. To see my version with a 4.0 inch throat, see here. Clamps are retained securely in a small recess modeled into…
Main proportions are taken from a Tecnifibre Carboflex Cannonball 125. Key ring hole is 2.4 mm in diameter. If you wish to print with two colours using a single nozzle, you can find here the models for the racquet split into “bottom +…
This is for the Kobalt (Lowes hardware) 12 inch dual bevel sliding compound miter saw item# 0358936 / model# SM3055LW. I bought my saw probably 8 years ago now but I'm pretty sure they still sell a derivative of this saw at the stores. A…
I searched far and wide for a replacement throat plate or a 3D model of a throat plate for Ridgid Saw MS1290LZA, to no avail. The model was discontinued. The old plates became brittle and broke apart. This design is much stronger and more…
This is a printable zero clearance throat plate for the Ryobi BT3000 Table Saw. This is version 3 of the throat plate and should work as printed for most cases. I am working on a v4 that will have a joint for providing a more robust…
Parametric model designed in OnShape to create a tight fitting zero clearance insert for my Delta 36-725 T2 table saw. I printed in PLA with 15% infill and 100% infill for the area in the blade pocket to provide added support after the…
The included .scad will generate a bandsaw throat plate for just about any bandsaw. By default it generates one with dust collection holes for a JET bandsaw (part #135010, STLs included) but it's super easy to modify to fit just about any…
I designed an all-in 3D printed table saw throat insert. It features changeable dovetailed zero clearance strips that are easy to make from 1/4″ birch plywood. The insert allows full range of movement of blade and splitter (height and…
Upgrade your Laguna Fusion F1/F2/F3 table saw with this customizable 3D printed zero clearance throat plate, now featuring enhanced dust collection . Improved Dust Extraction: Additional air holes strategically placed throughout the…
Part Number: 199037 Jet Bandsaw table insert (AKA Throat Plate). Specifically for the Jet Bandsaws: JWBS-14DXPRO JWBS-14CS JWBS-14OS JSL-12BS Three file uploads with different blade slot widths: 3/32" 1/8" 1/4" Replaces this part:…
Upgrade your Laguna Fusion F1/F2/F3 table saw with this customizable 3D printed zero clearance throat plate. Easy assembly: Designed to fit a standard 220x220mm print bed in two pieces for efficient printing. Hardware Compatibility:…
This was my first effort at duplicating a physical part in FreeCAD. The FreeCAD file can be modified as you see fit - I did add stl and 3mf for a 256mm bed (split) if you want to try printing. I tried various connectors, snap fit, dowels,…
Rigid Table Saw R4514 Throat Plate. Original one broke, needed to design a new one. Designed with having the broken throat plate, but not the saw in place (ie: tolerances not yet tested when printed). Printed in ABS, 40% infill with tree…
This clamp rack was specifically designed to hold the (outstanding) Bessey Tradesman's TGJ series F clamps with a 4.0" throat. To see my version with a 2.5 inch throat, see here. This clamp rack was specifically designed to hold the…
A cam / throat plate lock that fits several DeWalt tablesaws and can be used with a series of zero clearance inserts, such as the ones sold by Dulin on Cults3d. Also works with the original, of course. Based on DeWalt part number N705229…
Over time, band saw throat plates get damaged or destroyed. This occurs when making tight turns and the saw blade eats away at the throat plate. This file allows you to print a replacement anytime you need or you can print several and…
If you are looking for a teardrop design, it can be found here: https://www.printables.com/model/912783-squash-racket-teardrop-or-open-throat
Replacement throat plate for a Ryobi ETS1825 table saw, if your metal blade guard is misaligned (usually apparent at different blade heights) you may need to remove the thin section near the 1mm through cut. If you want to save time add a…
Recommend printing with 4-5 perimeters in order to not have exposed infill after you cut through the part and if your saw is off center a little (like mine is). Orient the print so the overhanging tabs at the joint sit on the build plate.…
I designed this insert to be heavy-duty; it has an internal support—designed to be printed solid—that surrounds the kerf cut. Print this as an assembly to retain the ability to print the support part as a solid inner piece. Enjoy! Print…
Remix of this; https://www.thingiverse.com/thing:4210417 But the remix part of thingiverse seems to be working like crap now. The plate designed by freddo411 is correct in almost every way other than the length, which needed an additional…
Replacement throat plate for the Ryobi TS1350 Compound Miter Saw. Original part is discontinued. Spines added to increase the rigidity. This part prints upside down. I do not make the screw holes go all the way through, nor do I design in…
The model that this drew inspiration from didn't quite work when my table tilted and was a little thin for my table. Print at 10% infill.
Bandsaw throat plate for Makita LB1200F Category: Parts
Grizzly G0555 Bandsaw Zero clearance table insert. This file has a notch to keep it from rotating. Two versions. One solid and one with ventilation holes for setups with dust collection.
DONT VASE MODE THESE. They are designed to fit in exact wall width, in and out. This is bellows and a throat guide for Mazzer Major coffee grinders. This will help you achieve zero grind retention. If you have a Mazzer, you know what the…
Replica throat plate for the Ryobi RTS12 table saw. Split into two parts for ease of printing, simply glue, epoxy, or otherwise fuse the two halves together. Use the original knob and screw for locking. For a wider opening, example for…
Remixed to make the throat longer and narrower. Added a stand for the bottle and a glue on throat if you already printed the original. Print instructions Category: Outdoor & Garden Print Settings Printer: Anet A8 Rafts: No Supports: No…
This is a remix to add a longer and more constrictive throat to the anti-popcorn mod This helps keeps the beans providing their own weight to the process until the end. Also, it reduces some of the grind bits that stay on the metal inlet…
Replacement for discontinued part. Original part number is 976516-001, fits 315.212500. See https://www.ereplacementparts.com/plate-p-1083500.html. It might fit other saws, I don't know. It should work with some others in the Craftsman…
The X-Files - Deepthroat - 1993-2002
Update 11 Jan 2021: The Dual Fan Side adapter shown is now posted for download; http://www.thingiverse.com/thing:4686251 . Update 28 April 2020: Revised the non-exploded hotend bill of material and assembly the incorrect diameter PTFE…
Printable zero clearance inserts for the venerable Rockwell Beaver 9" table saw. Select the insert size appropriate for your blade width: standard table saw blades are 1/8"; the other widths are for dado blade sets. I've included an image…
My father asked if I could design this for him as the OEM throat plate didn't set quite flush with the table. This can obviously be used as a replacement though if you've broken or lost yours. Update 11/6/19 - Added a updated .stl of the…
Spare plate for the Hammer 4400 bandsaw version without holes (thay are useless) simply snap in place
My friend asked me to model and print a replacement throat plate for her Scheppach Prima HBS 32 Vario band saw, as it chopped up the original over the years. Printed on the Creality CR-10 in Colorfabb nGen. bandsaw lintzaag bandsäge…
A selection of different throat inserts (aka table inserts) for the Record BS400 bandsaw. I printed mine with 100% infill, mainly so that the one without a slot could have its slot cut by the bandsaw to create a zero clearance insert.
Replacement throat plate for my powermatic bandsaw. It should fit most 14" bandsaws. Feel free to edit the model: Link to CAD model on OnShape
Zero clearance inset / throat plate for Craftsman miter saw (model 137.212290). Bought the saw used and the throat plate was cracked and falling apart. I taped up the remnants and modeled a new one since these are impossible to find.…
This is used to replace the Jet throat plate for a band saw.
This is a zero clearance throat plate for the Craftsman 113 table saw. It is the old Craftsman saw with the tilting table. I use a store bought plate to draw where to cut. However, I included an STL with a slightly raised line down the…
A remix of Mark Moran's excellent throat plate for Agazzani bandsaws. I don't need or want the extra blade clearance of the stock throat plate for my Agazzani B20 bandsaw. The extra clearance is to accommodate tilting the table - an…
This fits a Grizzly G0555 bandsaw but can likely be adapted for others as well. The parameterized Fusion model is included.
Works best with PETG 30% infill or greater. Print upside down for best results. Don't use PLA.
Ryobi Router Table RT-800 Throat plates
Throat Plate Insert I made for the "AEG 10" Dual Bevel Slide Compound Miter Saw (Model PS254DB) The insert is split into two identical pieces to fit most print beds. Together, they form a perfect replacement for the stock throat plate,…
Fan duct for a Creality printers (like Ender 3). Keep in mind, that this is a beta version.
Oscillating Spindle Sander Throat Plates Set Replacement throat plates / table inserts for oscillating spindle sanders. Designed to fit a widely rebranded machine platform used across multiple brands and models. These inserts help reduce…
Throat plate for Carbatec scrollsaw, as mentioned in https://www.youtube.com/watch?v=gpDB37-ML48&feature=youtu.be Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Category: Machine Tools
The clip for E3D's Revo hotend is smaller than normal, and I accidentally lost it while replacing the PTFE tube. Since I wasn't able to find an alternative anywhere, I decided to design and print my own - and hopefully it will help…
Task Force Table Saw Throat Plate
Not much else to say. I didn't like the factory throat plate on my 10-326 so I designed a new one. This fits snug so it won't rattle out or spin when in use. FreeCAD file attached so you can tweak it for your saw as needed.
A replacement throat plate for an Agazzani B18 bandsaw. Simplified and made with a minimal blade kerf to create a more-or-less zero-clearance insert. I was contacted by a woodworker about printing them a replacement insert after they saw…
solid throat plate for an Axminster bandsaw and others that take a 38mm plate
Replaces the throat plate of a Ridgid MS1250 miter saw. Add a long rectangular modifier to increase infill to 100% in the middle 15mm where the blade goes through. Install and make a slow cut. May have to take it out and sand a little…
用于 Kingroon KP3s Pro V2 喉管散热风扇保护罩 Used for Kingroon KP3s Pro V2 throat cooling fan protective cover
Crudely added a dust shroud to the user end of the tablesaw to help reduce the amount of dust that is thrown out of the gaps. Checkout the original model for the rest of the parts.…
Designed a replacement throat plate with a replaceable insert to achieve “zero clearance” for the now discontinued Delta 36-255L. Printed the base plate in Overture PLA Pro on a Bambu Lab X1C with a modifier (cube elongated to fit the…
This remix of Clifton McMorris' (@CliftonMcMor_1416112) model has several key improvements: Solid kerf cut area in the middle of the print provides a clean and dense area for the sawblade to cut the initial kerf Increased height (scaled…
4x4 gridfinity bin that holds the 5 throat plates that come with the RYOBI Universal Router Table (https://ryobitools.ca/products/details/intermediate-router-table_779/).
This is a bandsaw throat plate insert for the ShopFox W1672 bandsaw. This plate has a small bump on the outside to help it lock into the bandsaw and prevent it from rotating. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts:…
Replacement throat plate / insert for the Powerplus POW107 scroll saw I also created a plate with more support and a smaller hole for fine jobs where you don't need to angle the table.
Might need some post processing fine adjustment for your specific SIP Bandsaw. This fit my SIP 14" Professional Wood Bandsaw. Adhesion: No Support: No Material: PLA Infill: 100%, Concentric Resolution: 0.2mm
For a Beaver 3300 bandsaw but may fit yours, outer rime is 31.2mm This version has a second deeper lip to help it stay in place alone with some holes to help with dust collection. Category: Machine Tools
Throat plate for a Rockwell Beaver 3300 14inch bandsaw. Category: Machine Tools
Designed from scratch but used stevenhurry16's design as source of inspiration. Simple drawer for storing throats/nozzles inside 4040 extrusion. Designed two types of knobs: large and small and moving separator to divide different size…
This ist a remix of the really good https://www.thingiverse.com/thing:2503311 fan duct, to fit my personal Anet A8. This thing is really open draw and deserves the attribute high flow duct for the cooling fan. :) Had to modify the plate…
A simple LH and RH sawblade guard for a Chop saw or small table saw. The overall dimensions are .875" x 5.625" or 22.225mm x 142.875mm. It is about .156" thick. I tried to print it as solid as i could with Basic PLA. It seemed to work for…
Hello fiends, In my anet a8 recently i changed from direct drive to bow den setup with E3D v6 hotend. The hotend which i purchased having 1.75mm full metal throat. While printing the filament jams and prints were wasted. I fed up with…
throat plate, 2.5 in diameter
Gridfinity bin for the Mitutoyo Deep Throat Digital 1" Micrometer 389-351-30
I often get throat infections, so I use pain-relief sprays. One brand (DM → Mivolis) comes without a cap, making it easy to accidentally spray your pocket when carrying it around. 3D printing to the rescue! I designed a small C-shaped…
Hallo zusammen, da mir die PTFE-Inliner ausgingen habe ich mir eine Schneidehilfe konstruiert um neue zu machen, hierfür wird nur ein scharfes Cuttermesser benötigt. Nun sind die enden auch gerade abgeschnitten ;) Über ein Like oder Make…
This model modifies the stock feed throat part of a GigabotX to add a view window and a compressed air port. This model is an assembly of 4 parts. Three parts are 3D printable. One is a view window, typically produced by cutting a clear…
Throat plate for Zhejiang Jifa electric table saw. Size fits a 31 x 11cm opening. Fusion 360 file attached if you maybe want to make changes.
Replacement throat plates for the Grizzly G1019Z Bandsaw. There are two flavors provided. The one with the half-moon cutouts is identical to the original except with a narrower opening for the blade. I had trouble with the original…
Amethyst-throated sunangel 3d model for display and education, a detailed bird model of the real Amethyst-throated sunangel species suitable for collection and dioramas. The file is print-ready, prepared in a slicer to minimize guesswork…
Bought a used Delta 28-206 Bandsaw but it was missing the throat plate so I drew up a quick sketch with dimensions along with an image of the original aluminum plate etc & had Claude assist with the FreeCAD creation of the model. Fits my…
The Kreg precision router lift (PRS5000) comes with several inserts to accommodate different sized bits. However, there isn't one with a 1.5" throat. The next smaller one is just a little too small for larger router bits, and the next…
This is a Magnetic retainer to hold a 3mm T-handle Allen wrench that fits the throatplate retainer screw on a Harvey tablesaw. I printed with PETG, ,20mm, 6 walls, 20% infill and tree supports. Attaches with AT-N52 D10x3mm Neodymium…
This remix of Clifton McMorris' (@CliftonMcMor_1416112) model has several key improvements: Solid kerf cut area in the middle of the print provides a clean and dense area for the sawblade to cut the initial kerf Increased height (scaled…
Big Boss/Naked Snake's Throat Mic from Metal Gear Solid 3. Add some fabric to the front portion and tape some string to it to make it look like the in game object, but this is the extent of 3D printed material possible. Fits an 18" neck…
Throat plate for Zhejiang Jifa electric table saw. Size fits a 31 x 11cm opening. Fusion 360 file attached if you maybe want to make changes.
Big Boss/Naked Snake's Throat Mic from Metal Gear Solid 3. Add some fabric to the front portion and tape some string to it to make it look like the in game object, but this is the extent of 3D printed material possible. Fits an 18" neck…
The original plate on the band saw had way too much flex when cutting smaller items. I designed this replacement to have much less flex. I have been using it for a few years, and decided to share it. Recomment not printing in PLA. I…
I created this in 2 versions. The first is the 1 piece throat plates. These can be printed on a larger printer. I did not have one that was large enough to print the entire thing. So I cut it in two at a screw point and made it a lower…
![Clamp Rack for 2.5" Throat Bessey Tradesman Series F Clamps TGJ2.5[xx]](https://media.printables.com/media/prints/936501/images/7157902_f049f508-01fd-4dda-a38e-0011d4178cb1_f748f9c0-55ab-4dab-98fe-fa885813aa96/pxl_20240706_052349242night.jpg)
![Clamp Rack for 4" Throat Bessey Tradesman Series F Clamps TGJ4.0[xx]](https://media.printables.com/media/prints/959721/images/7329459_6304714d-e8d0-40f6-a0b0-09132559cc41_f558a664-6bad-4a68-9974-daf1df658dd0/pxl_20240708_011551636.jpg)
