Throat plate for Craftsman Miter Saw
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement for discontinued part. Original part number is 976516-001, fits 315.212500. Maybe other 315 and some Ryobi.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 68
- Makes
- 0
- Views
- 278
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Replacement for discontinued part. Original part number is 976516-001, fits 315.212500. See https://www.ereplacementparts.com/plate-p-1083500.html. It might fit other saws, I don't know. It should work with some others in the Craftsman 315 series, and maybe Ryobi TS1340 and TS1342. It's 44.3 mm wide and 200 mm long, with four countersunk holes for #8 screws.
Slot included, 3.2 mm wide. That's a little bit less than a typical 1/8 inch wide blade, so on first use the blade widens the slot only a little bit. I recommend printing at 100% infill. It doesn't take much longer and leaves fewer failure points, especially if you make a bevel cut.
Make several, you'll want a different one for bevel cuts, because that will widen the slot even more, but then you'll want a zero clearance one for straight cuts.