1 / 2
Throat plate for Craftsman Miter Saw — zdjęcie 1
1 / 2

Throat plate for Craftsman Miter Saw

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement for discontinued part. Original part number is 976516-001, fits 315.212500. Maybe other 315 and some Ryobi.

Ocena
0 / 5
Polubienia
3
Pobrania
67
Wydruki
0
Wyświetlenia
276
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

Replacement for discontinued part. Original part number is 976516-001, fits 315.212500. See https://www.ereplacementparts.com/plate-p-1083500.html.  It might fit other saws, I don't know. It should work with some others in the Craftsman 315 series, and maybe Ryobi TS1340 and TS1342. It's 44.3 mm wide and 200 mm long, with four countersunk holes for #8 screws. 

Slot included, 3.2 mm wide. That's a little bit less than a typical 1/8 inch wide blade, so on first use the blade widens the slot only a little bit. I recommend printing at 100% infill. It doesn't take much longer and leaves fewer failure points, especially if you make a bevel cut. 

Make several, you'll want a different one for bevel cuts, because that will widen the slot even more, but then you'll want a zero clearance one for straight cuts.

Tagi