1 / 2
Craftsman Miter Saw Zero Clearance Throat Plate Insert — image 1
1 / 2

Craftsman Miter Saw Zero Clearance Throat Plate Insert

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Zero clearance inset / throat plate for Craftsman miter saw (model 137.212290).

Rating
0 / 5
Likes
4
Downloads
41
Makes
0
Views
302
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution

Zero clearance inset / throat plate for Craftsman miter saw (model 137.212290). Bought the saw used and the throat plate was cracked and falling apart. I taped up the remnants and modeled a new one since these are impossible to find.

Print with the flat side down to avoid supports. Using a red or another bright color as a reminder to keep the fingies away would likely be a good idea as well.

Mount with the original screws and slowly cut into the plate. You could also make additional plates for different angles or even blade kerfs if needed.

Tags