1 / 2
Craftsman Miter Saw Zero Clearance Throat Plate Insert — zdjęcie 1
1 / 2

Craftsman Miter Saw Zero Clearance Throat Plate Insert

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Zero clearance inset / throat plate for Craftsman miter saw (model 137.212290).

Ocena
0 / 5
Polubienia
4
Pobrania
41
Wydruki
0
Wyświetlenia
303
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution

Zero clearance inset / throat plate for Craftsman miter saw (model 137.212290). Bought the saw used and the throat plate was cracked and falling apart. I taped up the remnants and modeled a new one since these are impossible to find.

Print with the flat side down to avoid supports. Using a red or another bright color as a reminder to keep the fingies away would likely be a good idea as well.

Mount with the original screws and slowly cut into the plate. You could also make additional plates for different angles or even blade kerfs if needed.

Tagi