1 / 1
DeWalt Throat plate lock / cam / N705229 — image 1

DeWalt Throat plate lock / cam / N705229

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A replacement lock/cam used to lock the throatplate in a series of DeWalt jobsite tablesaws.

Rating
5 / 5
Likes
6
Downloads
149
Makes
1
Views
641
Reviews
1

Updated at source:

Model information

Category
Tools
License
Creative Commons — Public Domain

A cam / throat plate lock that fits several DeWalt tablesaws and can be used with a series of zero clearance inserts, such as the ones sold by Dulin on Cults3d.

Also works with the original, of course.

Based on DeWalt part number N705229

Required hardware:

  • 1x m4 pan head self tapping screw - at least 12mm long. Part is left open all the way through to facilitate a longer screw.

Tested machines:

  • DWE7485
  • DWE7492

Print suggestions:

  • Use more perimeters - I've had good results with 4. Your screw will self-cut into the material and needs some body to hold on to. If there is a kickback, you'll want most of the load to be on the perimeters, not the infill.
  • 0.3mm with a .6 nozzle and 25% infill gave a good result.
  • Supports are required - stick to the orientation in the screenshot (light grey model), which has the largest flat surface down on the bed. The little nook requires some supports, but isn't critical.

Tags