1 / 1
DeWalt Throat plate lock / cam / N705229
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement lock/cam used to lock the throatplate in a series of DeWalt jobsite tablesaws.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 148
- Wydruki
- 1
- Wyświetlenia
- 636
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (20)Powiązane
A cam / throat plate lock that fits several DeWalt tablesaws and can be used with a series of zero clearance inserts, such as the ones sold by Dulin on Cults3d.
Also works with the original, of course.
Based on DeWalt part number N705229
Required hardware:
- 1x m4 pan head self tapping screw - at least 12mm long. Part is left open all the way through to facilitate a longer screw.
Tested machines:
- DWE7485
- DWE7492
Print suggestions:
- Use more perimeters - I've had good results with 4. Your screw will self-cut into the material and needs some body to hold on to. If there is a kickback, you'll want most of the load to be on the perimeters, not the infill.
- 0.3mm with a .6 nozzle and 25% infill gave a good result.
- Supports are required - stick to the orientation in the screenshot (light grey model), which has the largest flat surface down on the bed. The little nook requires some supports, but isn't critical.