1 / 3
Agazzani B20 Bandsaw Zero Clearance Throat Plate — image 1
1 / 3

Agazzani B20 Bandsaw Zero Clearance Throat Plate

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Throat plate for Agazzani B20 bandsaw with minimal clearance for the blade

Rating
0 / 5
Likes
1
Downloads
37
Makes
0
Views
253
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — Share Alike

A remix of Mark Moran's excellent throat plate for Agazzani bandsaws.

I don't need or want the extra blade clearance of the stock throat plate for my Agazzani B20 bandsaw.  The extra clearance is to accommodate tilting the table - an action I have never taken on a bandsaw in over 30 years of woodworking.  My stock insert was shot, and when I found Mark's model I saw my opportunity to make a “zero clearance” version for better material support and safety with small parts.

I also modeled M5 threads into the legs and clearance holes at the top to ease the insertion of the set screw levelers.

Note: If you need a throatplate for the smaller Agazzani B18 bandsaw, I have posted a model for that here.

Printing Parameters
  • Printed in PLA.  PETG or ABS would also be fine.
  • 0.2mm layer height
  • 4 perimeters
  • 8 layers top and bottom

 

Tags