Agazzani B20 Bandsaw Zero Clearance Throat Plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Throat plate for Agazzani B20 bandsaw with minimal clearance for the blade
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 250
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A remix of Mark Moran's excellent throat plate for Agazzani bandsaws.
I don't need or want the extra blade clearance of the stock throat plate for my Agazzani B20 bandsaw. The extra clearance is to accommodate tilting the table - an action I have never taken on a bandsaw in over 30 years of woodworking. My stock insert was shot, and when I found Mark's model I saw my opportunity to make a “zero clearance” version for better material support and safety with small parts.
I also modeled M5 threads into the legs and clearance holes at the top to ease the insertion of the set screw levelers.
Note: If you need a throatplate for the smaller Agazzani B18 bandsaw, I have posted a model for that here.
Printing Parameters
- Printed in PLA. PETG or ABS would also be fine.
- 0.2mm layer height
- 4 perimeters
- 8 layers top and bottom