Liczymy pasujące modele…
Changing blades on a bandsaw or large sawmill requires properly setting the tension of the new blade. If you run a sawmill these gauges ( tensiometer being the $20 word for it) are part of the required tools of the trade. Unfortunately…
Simple Sleeves to hold 3-5x spare blades for a Milwaukee 2529-20 Subcompact Bandsaw. STEP files included if you would like to tweak for your own usage! Included are labeled sleeves for 8 to 11 TPI, 12 to 16TPI, and 18TPI blades. I printed…
This replaces the factory dust port on a Grizzly G0948 bandsaw. It will fit a standard 2.5" dust hose. It uses the screws from the original dust port. This can be printed with no supports on a Prusa MK3S.
This is a replacement similar to the stock one, on a Grizzly G0513X2BF, as well as a narrow version. Can be printed without supports.
The upper and lower blade guides are identical on this vintage -circa 1950 bandsaw, replacements are difficult to find, and the design would be a little tricky to machine, so I made a printable one. I made this one in PETG and I used a…
lubrification system for horizontal bandsaw one in 3d print and the other can be made by machining
Parametric Trigger Lock for portable bandsaw Parkside PMBA20 20 V. !!!This Trigger Lock is meant to be used only in combination with a bandsaw table. It can be dangerous to use it without a table!!! Required 3D printed parts:…
This is a replacement insert block for the Laguna 14|12 and 14|bx bandsaws, with some design improvements to make it more effective, durable, and damage resistant than the OEM part. This doesn't need to be extremely strong, so don't waste…
Insert for Shopsmith cast iron bandsaw table. Slot to the right of center. If you need the slot to the left, simple mirror the 3MF left to right in your slicer. There are three small nubs on the outer rim for sizing. Sand or file for a…
Rikon Model 10-3061 Bandsaw Replacement Fence Hanging Panel, Rikon original part P10-306-62 continues to be out of stock. I improved on their design a bit, appears to be a bit stronger. Printed on MK4 with Prusament Galaxy Black PETG…
Parametric round insert plate for bandsaw, with dust extraction ports. Parameters for: Diameter Thickness Throat width and length and offset
Project file for https://www.thingiverse.com/thing:6785497
the insert fow the bandsaw was really used up and destroyed in some places, so I designed a new one
Grizzly G0555 Bandsaw Zero clearance table insert. This file has a notch to keep it from rotating. Two versions. One solid and one with ventilation holes for setups with dust collection.
Might need some post processing fine adjustment for your specific SIP Bandsaw. This fit my SIP 14" Professional Wood Bandsaw. Adhesion: No Support: No Material: PLA Infill: 100%, Concentric Resolution: 0.2mm
Designed a replacement cooling fan for the motor on my 10" Craftsman bandsaw. Model 113.244512C. Printed out of PETG and it has been holding up well. Both STL and Fusion 360 files included.
Replacement motor pulley for Craftsman 10" bandsaw. Bandsaw model number 113.244512C. Printed in PETG and has been holding up well. Fusion 360 file will allow you to tweak the bore size if you need.
Replacement tire for Crafsman 10" Bandsaw Model Number 113.244512C. Printed in TPU. Best to use random seams to maximize strength.
Fits perfectly, you only need to drill the hole for the optional screw. Most bandsaws use a circular table insert, however the JWBS-9 has a square one. My first published 3d design.
This is a quick model of a bandsaw insert with or without dust holes for a 17 in General International 90-240M. It will probably fit other like King KC-1702FXB. OD is about 2.75in (70mm) with a first stepdown tickness of 3/16 in (4.76mm).…
This is an easy to print sparepart for the Record Power BS300E 12" Bandsaw.
This is intended to be used while the saw is mounted to a table in the vertical position. Check out the video. Printed upside-down with support. Use a brim on the shaft. The hinge takes an 8-32 machine screw. It was designed to use a…
This is a three roller bandsaw guide for a VEB 750 A, which replaces the pertinax guides. You need: 5x 608z roller bearing 1x 607zz roller bearing 4x M8x20 (needs to be hex head) 4x M8 washer 4x M8 nut 2x M6x60 (needs to be hex head) 1x…
Ok this is bandsaw jig for a larger bandsaw to create a large roller fence. I saw them online and they are pricy. The design uses a lot of plastic and i used abs gf for most parts however i dont think its to importnat. So print the 4…
Harbor Freight 14 in Bandsaw Insert with Adjustable Guide Blocks. Saw a similar Insert and decided to Design one for my Bandsaw to help keep Blade from wondering. Install Insert, Then Adjust Blocks to rub against Blade and tighten blocks…
I designed this to replace the original puck in my delta bandsaw. I printed this in PETG but PLA would probably be fine as well. In the uploaded STL files the slot has been offset by a couple of mm from center so that the blade is…
Spare plate for the Hammer 4400 bandsaw version without holes (thay are useless) simply snap in place
Was having fun making wood Reindeers on my bandsaw and figured I would do the step in Fusion360 to be able to share with all of you this timeless classic bandsaw reindeer. Prints with no support.
Einsatz für Tischplatte passend für Holzkraft HBS 633 S Bandsäge.
Tischeinlage mit Absauglöchern, die für 90° und 45° Schnitte genutzt werden kann. Zum drucken auf die Flache seite legen. Bei gefallen lasst mir doch gerne ein Like, Make oder Kommentar da Table insert with suction holes that can be used…
Changing blades on a bandsaw or large sawmill requires properly setting the tension of the new blade. If you run a sawmill these gauges ( tensiometer being the $20 word for it) are part of the required tools of the trade. Unfortunately…
This is an adapter to connect a regular Henry vacuum cleaner to the dust extraction of an Inca bandsaw with a ~53mm port. Mine is a 1980s “Euro 260” model, but I assume they all have the same port. v4 is the original version and which I…
With some blades I have trouble getting the last 1/2 turn to the proper tension with the stock small knob. So I designed this star knob. Since it provides so much leverage, I left it flush with the saw. That saved filament. Printed with…
Just a super simple, push on knob for making adjustment to the blade guide bearings on a Grizzly bandsaw (and other brands with similar blade guides) These are TPU to make a nice flexible, push on grip to the screw head
This is a replacement plate for the Delta 14" Bandsaw 28-400. For some reason, the original plate seems like it was flipped backwards. The flipped version orients the plate so the blade slot points away from the bandsaw, but both should…
9" bandsaw tire with groove, made especially for my old skil 3386 bandsaw, printed with TPU.
Designed a table insert plate for my bandsaw. (JET JWBS-14SFX) Dimensions are: 70mm wide x 3.3mm deep (top part) 63.5mm wide x 3mm deep lower insert (all one piece). Print upside down (wider face on bed). You'll want it pretty dense for…
Designed a table insert plate for my bandsaw. (JET JWBS-14SFX) Dimensions are: 70mm wide x 3.3mm deep (top part) 63.5mm wide x 3mm deep lower insert (all one piece). Print upside down (wider face on bed). You'll want it pretty dense for…
Designed a table insert plate for my bandsaw. (JET JWBS-14SFX) Dimensions are: 70mm wide x 3.3mm deep (top part) 63.5mm wide x 3mm deep lower insert (all one piece). Print upside down (wider face on bed). You'll want it pretty dense for…
Designed a table insert plate for my bandsaw. (JET JWBS-14SFX) Dimensions are: 70mm wide x 3.3mm deep (top part) 63.5mm wide x 3mm deep lower insert (all one piece). Print upside down (wider face on bed). You'll want it pretty dense for…
Key Switch for craftsman bandsaw 113.248510 Remixed from https://www.thingiverse.com/thing:2428459 as a starting point. made easier to print flat. Should work for both 22256 or 22255 but I haven't tested it for a curved switch model.
a quick and simple model for a replacement bandsaw table insert, specifically made for Holzkraft HBS 433 531 431 533
There are two different solutions in this set. An adapter that goes from the smaller sized port that is already on the bandsaw to a shop-vac. A drop-in replacement for the original dust port. Both of solutions accept two different sizes…
I don't like the stressful experience of having to hold a valuable piece of wood against the bandsaw fence, hoping to resaw it perfectly. Particularly as the wood gets wider, it becomes very challenging to get a perfect cut, wasting wood…
Simple Sleeves to hold 3-5x spare blades for a Milwaukee 2529-20 Subcompact Bandsaw. STEP files included if you would like to tweak for your own usage! Included are labeled sleeves for 8 to 11 TPI, 12 to 16TPI, and 18TPI blades. I printed…
Buffalo Bandsaw Plate 14" Saw - Delta and Others 63.85mm Diameter 2.6mm Thick
A sawing guide for the bandsaw for sawing square sections into two triangles. Designed for pieces around 15mm in width. To be clamped to a straightedge. Suitable for small bandsaw with blades less than 25mm deep. I printed mine with 80%…
Hole cover piece for a bandsaw table. Can be fully modified for other bandsaw models. In this case its for a HBS-SBW-4800 Bandsaw.…
This flip stop is designed to work with the Shopsmith 510 rip fence, 520 rip fence and the band saw fence. It allows you to easily make repeated cuts or drill consistently placed holes. The hardware below is easily obtained at any…
A simple sign to hang on my bandsaw to remind me I have untensioned the blade when it is not in use (the handle is at the back so not visable) - I have upgraded the bandsaw using https://www.printables.com/model/490390-thumb-screw so I…
insert for the small bandsaw black + decker DN330 also for 45°. ---- Einlage für die Black&Decker DN330 Bandsäge - auch für 45°. --- PS: Theres also a spare part for the upper knob for tensoning the blade, because the original one is a…
Update 25Nov22 I've uploaded Version 3 of the zero clearance & 6mm Chamfered Slot inserts, which are stronger again than version 2, with more reinforcing ribs. I now print these in ASA, which seems more resilient than PETG or PLA and I've…
The brackets have holes for 6-7 (in each hole) of these 12mm x 3mm magnets . It will take about 48 or so magnets. The two stacks on the side that are close to one another you will want to alter the polarity so they don't oppose one…
Anyone that has this bandsaw knows that while it's nice that this affordable saw has guide bearings, the bracket for them is too deep making the bearings to far forward and allowing them to come in contact with the blade teeth. This part…
Bracket consists of 4 parts, two cross braces (right and left) and two support brackets (front and rear). Bracket components are assembled using 8 - 4mm x 16mm countersunk cap screws, flat washers, and hex nuts. Once assembled, bracket is…
With this bandsaw jig you can measure if the saw is parallel to the fence. You need a 10x2mm magnet (2mm thickness), which is glued into the hole with super glue. When mounted to the blade you can check whether the fence is parallel to…
Motivation I didn't really have access to a small amount of reasonably priced rubber that would work well for resawing. I think the TPU cost for this build is less than a dollar. And I've tuned its profile so it's stiff at the base, but…
Made this for a Rikon 14” bandsaw (Model 10-326). It is easy to hand tighten the thumb knobs on the spring-loaded tool-less bearing guide system but often they lock on too tight to remove by hand. This small wrench fits over top of the…
Printed one of these with SLA, and it is in service. Have not tried with FDM.
Milwaukee M12 Bandsaw Wall Mount – 3D Printed Keep your workspace organized with this custom wall mount for the Milwaukee M12 handheld bandsaw . Designed to securely hold your tool when not in use, this mount is 3D printed from durable…
Holder for the tools and accessories for Recoord Power 300E Bandsaw.
This knob replaces the missing one on a Delta ShopMaster BS100 bandsaw. I can't say what the original looked like, but this one is about the same diameter as other knobs on the saw. I shaped it to be easy to tighten, and the needed washer…
This model is a replacement for the original chip tray of a metal band saw. The band saw is sold under different brand names, e.g. Bernado EBS100S Optimum S100G BS-100 Small Sawing Machine Portable Metal Band Saw Machine Movable TTMC…
Slight mod for a tension gauge using a dial indicator to accurately measure the tension in one's bandsaw blade.
A replacement blade guide for the Harbor Freight bandsaw.
Replacement table insert, compared to the original parts, smaller clearance, useful for cutting small pieces. Tighter fit to the table hole, better flatness, the original part was below the table surface.
Additional flap on the stop button, to increased safety when working with the saw. Axis made of 2,5mm blind rivet mandrel, cut to proper length 41mm. STOP sign made with an extra fine tip white oil marker The flap should drop freely after…
I printed this simple cutting guide for my square blanks. This allows me to trim the corners with the band saw, making turning faster and easier. Please observe safety precautions! Printed with PLA.
Protection for metal bandsaw from Wiltec. Alos acts as a toolholder. The bumper is made from a piece of rubber. Fits for this model - LINK
Bandsaw blade alignment involves adjusting the blade so that the deepest part of the blade gullet is centered on the crown of the tire. This tool simplifies the adjustment by making it easy to see when the gullet is centered. This tool…
This replaces the factory dust port on a Grizzly G0948 bandsaw. It will fit a standard 2.5" dust hose. It uses the screws from the original dust port. This can be printed with no supports on a Prusa MK3S.
This is a replacement similar to the stock one, on a Grizzly G0513X2BF, as well as a narrow version. Can be printed without supports.
BandsägeFix Jig to cut smaller wooden pieces on the bandsaw. You need my Jig and Fixture Handle to complete the project: You also need two M6x55mm socket head screws, two M6 nuts for the essembly and a 5x30mm Domino-Dovel. I added some…
The included .scad will generate a bandsaw throat plate for just about any bandsaw. By default it generates one with dust collection holes for a JET bandsaw (part #135010, STLs included) but it's super easy to modify to fit just about any…
Replacement throat plate for my powermatic bandsaw. It should fit most 14" bandsaws. Feel free to edit the model: Link to CAD model on OnShape
I wanted to keep the two alternate blades for my WEN 9" bandsaw (BA3959) near or on the machine, but in a case. I wasn't sure where on or near the saw I wanted to keep them, so to maximize flexibility I basically designed it as a…
This model replaces the plastic insert plate for a Powermatic 14" Bandsaw (PWBS-14CS.) The diameter and thickness can be altered to suit other bandsaws. The throat width can be adjusted to give a zero clearance insert. The holes can be…
This is a bandsaw throat plate insert for the ShopFox W1672 bandsaw. This plate has a small bump on the outside to help it lock into the bandsaw and prevent it from rotating. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts:…
This is a zero clearance throat plate for the Craftsman 113 table saw. It is the old Craftsman saw with the tilting table. I use a store bought plate to draw where to cut. However, I included an STL with a slightly raised line down the…
Zero Clearance Laguna Bandsaw Insert, hd16 lt37
The upper and lower blade guides are identical on this vintage -circa 1950 bandsaw, replacements are difficult to find, and the design would be a little tricky to machine, so I made a printable one. I made this one in PETG and I used a…
Replacement throat plates for the Grizzly G1019Z Bandsaw. There are two flavors provided. The one with the half-moon cutouts is identical to the original except with a narrower opening for the blade. I had trouble with the original…
Bandsaw Blade Insert Cover, use slicer to remove top and bottom layer and use infill to modify spacing.
A simple tool for checking and correcting the parallel alignment of the saw blade to the rip fence. A neodymium magnet measuring 6x3mm must also be inserted. Print settings: PLA+ No support 0.4 nozzle 4 wall lines 20% infill 5 bottom and…
I have a terrible time making small straight cuts on my benchtop bandsaw so I made a really simple miter guide/gauge. Just print out the two pieces and glue them together. I used basic superglue and it's held up great so far for a couple…
Bought a cheap featherboard and the slide pieces it came with don't fit my Ryobi bandsaw so I made some replacements. Just print 2 of them and you're good to go, they'll hold tight.
Precision Guide for Holzkraft HBS351 Bandsaw This is a guide add-on for the Holzkraft HBS351 Bandsaw to cut thin strips and fine workpieces. It attaches to a 42 mm wide main guide of the saw and lowers down to 3 mm above the saw table.…
Englisch This is a 3D-printable replacement for the plastic table insert of an Einhell bandsaw (Original Part No. 430801801068). If your original insert is worn or damaged, this model provides a precise fit to ensure a safe and smooth…
lubrification system for horizontal bandsaw one in 3d print and the other can be made by machining
Quick and easy table inset for the Startrite 523 Bandsaw. Print as structural probably best in PETG but will work in PLA
Parametric Trigger Lock for portable bandsaw Parkside PMBA20 20 V. !!!This Trigger Lock is meant to be used only in combination with a bandsaw table. It can be dangerous to use it without a table!!! Required 3D printed parts:…
I acquired an older model Shopsmith Mark V for next to nothing from a lady while on a service call. Several pieces were missing, one such piece being the coupler that connects the motor to the bandsaw. Shopsmith sells this adapter for…
Parametric Bandsaw Table for portable bandsaw Parkside PMBA20 20 V This table is meant to be hold in a vise. The use of a triggerlock is recommended: Required 3D printed parts: Table.stl or Table_Extended.stl (1x) AnglePiece.stl (1x)…
Emco Star Band saw cover replacement. -print in PETG -4 Plus walls to ensure strength -50% or Higher infill
Male camlok fitting based on Peter H's camlok system and for use on the dust port of the Ryobi BS900 bandsaw. Should also fit the dust ports of the BS901, BS902, BS903, and BS904. Fitting OD is 57mm. Printed on Ender S1 Plus. 3 walls, 10%…
Not much else to say. I didn't like the factory throat plate on my 10-326 so I designed a new one. This fits snug so it won't rattle out or spin when in use. FreeCAD file attached so you can tweak it for your saw as needed.
