BandsägeFix Bandsaws Jig
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A handy jig to savely cut small parts on the bandsaw.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 233
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
BandsägeFix Jig to cut smaller wooden pieces on the bandsaw.
You need my Jig and Fixture Handle to complete the project:
You also need two M6x55mm socket head screws, two M6 nuts for the essembly and a 5x30mm Domino-Dovel.
I added some PTFE-Tape to the bottom to improve the friction on the table.
Printing Tips:
I prefer PETG for printing or if PLA is used +30% infill.
Important safety note:
Please read and understand all safety rules to your machine and pay attention to all safety rule for working with machines. Under no circumstances, remove any of a machine’s existing safety devices. Guards or protective bridges on planers and splitters or riving knives and safety hoods on circular table saws are important safety devices.