BandsägeFix Bandsaws Jig
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A handy jig to savely cut small parts on the bandsaw.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 46
- Makes
- 0
- Views
- 233
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
BandsägeFix Jig to cut smaller wooden pieces on the bandsaw.
You need my Jig and Fixture Handle to complete the project:
You also need two M6x55mm socket head screws, two M6 nuts for the essembly and a 5x30mm Domino-Dovel.
I added some PTFE-Tape to the bottom to improve the friction on the table.
Printing Tips:
I prefer PETG for printing or if PLA is used +30% infill.
Important safety note:
Please read and understand all safety rules to your machine and pay attention to all safety rule for working with machines. Under no circumstances, remove any of a machine’s existing safety devices. Guards or protective bridges on planers and splitters or riving knives and safety hoods on circular table saws are important safety devices.