1 / 5
Rikon 10" Bandsaw Blade Tensioner Star Knob
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
With some blades I have trouble getting the last 1/2 turn to the proper tension with the stock small knob.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 62
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
With some blades I have trouble getting the last 1/2 turn to the proper tension with the stock small knob. So I designed this star knob. Since it provides so much leverage, I left it flush with the saw. That saved filament. Printed with PLA, no special settings. I put a small chamfer at the base where the fillet begins so it will print without being stringy.