30 modeli
A dust chute and PVC clips designed to get as much airflow as possible within the space allowed under the table of a Rikon 10-324TG band saw. Very likely also compatible with the 10-324 and 10-326. Hardware required for a full…
A Zero Clearance Insert for the Bandsaw. Model Rikon 10-3061 10" Bandsaw with better dust collection. I included the f3D to be able to change the size to fit your own bandsaw. Edit 3/31/24: Added 2 files for 6mm longer cut length in the…
Over time, band saw throat plates get damaged or destroyed. This occurs when making tight turns and the saw blade eats away at the throat plate. This file allows you to print a replacement anytime you need or you can print several and…
Logos for Powermatic, Proto, Rikon and SawStop. Let me know if you're looking for a particular logo and I'll try and get it for you.
This is an adapter for dust collection of the Rikon 10" bandsaw. It may work for others as well. The stock dust extraction leaves a lot to be desired. The guide bearings under the cast iron top got jammed with dust. I decided to collect…
I made these end caps for the fence rail of a Rikon 14" bandsaw so it will hurt less when I keep bumping into the rail. For now it's made from PLA as it doesn't need the extra strength of PETG. After I bump into it a few times I may…
Disc air intake cover for a common form factor of cast iron combination belt/disc sanders with a 6-inch disc. My model is an older Ryobi BD4601, but if you have a similar model, and the under-table intake looks the same as the last photo,…
I present to you: the filter adapter for Zeiss Ikon SuperIkonta 530/2 bellow cameras. I wanted to fit my cokin A filter system onto my medium format SuperIkonta to make some sweet infrared shots so I designed this adapter. It fits this…
The measured diameter of the bar is 25mm. It pressed on for me and was not loose. Could fit any bar that diameter. The fence cap is for a 4mm x 4mm “L” shape. Print screw at 100% infill.
A cover for the Kuhn Rikon ICED santoku knife. The blade is held in place with a spring loaded lever. Use your thumb to release the blade. With your slicer you can emboss your name or a label to the side of the cover.
Rikon Model 10-3061 Bandsaw Replacement Fence Hanging Panel, Rikon original part P10-306-62 continues to be out of stock. I improved on their design a bit, appears to be a bit stronger. Printed on MK4 with Prusament Galaxy Black PETG…
I am getting into Gridfinity and custom bins, and made this for my kitchen drawer. It easily holds 3 peelers, maybe 4. Also added is the silhouette if you need that to do your own thing. I scanned the peeler on a flatbed scanner, moved…
Not much else to say. I didn't like the factory throat plate on my 10-326 so I designed a new one. This fits snug so it won't rattle out or spin when in use. FreeCAD file attached so you can tweak it for your saw as needed.
The brackets have holes for 6-7 (in each hole) of these 12mm x 3mm magnets . It will take about 48 or so magnets. The two stacks on the side that are close to one another you will want to alter the polarity so they don't oppose one…
With some blades I have trouble getting the last 1/2 turn to the proper tension with the stock small knob. So I designed this star knob. Since it provides so much leverage, I left it flush with the saw. That saved filament. Printed with…
This lets me connect my Fein Turbo shop vacuum to a small Rikon belt/drum sander. I included the OpenSCAD file for use in other designs. Printed in green PLA with 0.2mm layers.
CAMLOCK adapter for Rikon 8" benchtop jointer
this is a replacement part of the Kuhn Rikon Pepper Mill
Is the handle of your Kuhn Rikon salad spinner broken ? No problem ! Print these parts and easily replace it to give your favorite spinner a second life. Instructions : Print the model with at least 2 perimeters. The centering knob must…
Made this for a Rikon 14” bandsaw (Model 10-326). It is easy to hand tighten the thumb knobs on the spring-loaded tool-less bearing guide system but often they lock on too tight to remove by hand. This small wrench fits over top of the…
Goal was to make a magnetic sheath for a 10cm “colori” paring knife from Kuhn-Rikon . We lost the original sheath, and we were carrying the knife with a cork jammed on the tip so it wouldn't poke holes in the picnic bag. The design uses…
Bandsaw blade alignment involves adjusting the blade so that the deepest part of the blade gullet is centered on the crown of the tire. This tool simplifies the adjustment by making it easy to see when the gullet is centered. This tool…
Needed a spacer for my new CBN wheel to work on my Rikon slow speed grinder. its very simple but maybe it could save you 10 minutes of modeling time. I printed with 5 top/bottom layers and 25% gyroid.
This is to replace a switch plate on a Rikon Model 60-200: 2 HP Dust Collector . I never touch the switch because I use a remote . But that didn't stop the switch from failing (I cannot mechanically switch it off), which led me to unscrew…
Kuhn Rikon pepper mill has a ceramic grinder which is connected to the turning shaft by a plastic holder. While it's an excellent pepper mill, the original plastic grinder holder cracked in several places causing the ceramic grinder to no…
Disc air intake cover for a common form factor of cast iron combination belt/disc sanders with a 6-inch disc. My model is an older Ryobi BD4601, but if you have a similar model, and the under-table intake looks the same as the last photo,…
Needed a spacer for my new CBN wheel to work on my Rikon slow speed grinder. its very simple but maybe it could save you 10 minutes of modeling time. I printed with 5 top/bottom layers and 25% gyroid.
That's a little toy from my childhood that I was wonder, could I make it myself.. and guess, what?... I did it., What u need: 7 colors of PLA filament (PETG, if u got dey not stringing would work too.. maybe), base filament (that black…
That's a little toy from my childhood that I was wonder, could I make it myself.. and guess, what?... I did it., What u need: 7 colors of PLA filament (PETG, if u got dey not stringing would work too.. maybe), base filament (that black…
