P
PrintablesTopher
RIKON 10-305 Bandsaw Zero-Clearance Insert
100% Infill
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for PETGSource material: PET
- Downloads
- 105
- Likes
- 10
- Rating
- 5
Search results: rikon
30 models
P
PrintablesMeltinPlastic
Fein vacuum adapter for Rikon belt/drum sander
This lets me connect my Fein Turbo shop vacuum to a small Rikon belt/drum sander. I included the OpenSCAD file for use in other designs. Printed in green PLA with 0.2mm layers.
Print approx. €1.52–€1.86 excl. taxPreliminary estimate for one variant
- Downloads
- 17
- Likes
- 1
- Rating
- 0
P
PrintablesBrandon Beaumia
Rikon 14" Bandsaw Dust Collection Setup
A dust chute and PVC clips designed to get as much airflow as possible within the space allowed under the table of a Rikon 10-324TG band saw. Very likely also compatible with the 10-324 and 10-326. Hardware required for a full…
- Downloads
- 233
- Likes
- 33
- Rating
- 0
P
Printablescrashkg
10" Rikon Bandsaw Zero Clearance Insert Model 10-3061
A Zero Clearance Insert for the Bandsaw. Model Rikon 10-3061 10" Bandsaw with better dust collection. I included the f3D to be able to change the size to fit your own bandsaw. Edit 3/31/24: Added 2 files for 6mm longer cut length in the…
- Downloads
- 193
- Likes
- 27
- Rating
- 5
P
PrintablesBob B
Rikon Bandsaw Throat Plate
Over time, band saw throat plates get damaged or destroyed. This occurs when making tight turns and the saw blade eats away at the throat plate. This file allows you to print a replacement anytime you need or you can print several and…
- Downloads
- 149
- Likes
- 11
- Rating
- 5
P
PrintablesYumanBeing
Tool Logos #10 (Powermatic, Proto, Rikon, SawStop)
Logos for Powermatic, Proto, Rikon and SawStop. Let me know if you're looking for a particular logo and I'll try and get it for you.
- Downloads
- 105
- Likes
- 25
- Rating
- 5
P
Printablescrashkg
Rikon 10" Bandsaw Dust Extraction (10-3061)
This is an adapter for dust collection of the Rikon 10" bandsaw. It may work for others as well. The stock dust extraction leaves a lot to be desired. The guide bearings under the cast iron top got jammed with dust. I decided to collect…
- Downloads
- 94
- Likes
- 15
- Rating
- 0
P
PrintablesDude
Rikon 14" bandsaw rail caps
I made these end caps for the fence rail of a Rikon 14" bandsaw so it will hurt less when I keep bumping into the rail. For now it's made from PLA as it doesn't need the extra strength of PETG. After I bump into it a few times I may…
- Downloads
- 87
- Likes
- 14
- Rating
- 0
P
Printablescookiecrook
Disc sander dust/air intake cover for common combo belt/disc sanders, Ryobi, Grizzly, Rikon, and others
Disc air intake cover for a common form factor of cast iron combination belt/disc sanders with a 6-inch disc. My model is an older Ryobi BD4601, but if you have a similar model, and the under-table intake looks the same as the last photo,…
- Downloads
- 45
- Likes
- 16
- Rating
- 0
P
Printablesbasti315
Zeiss Ikon Superikonta 62mm filter adapter
I present to you: the filter adapter for Zeiss Ikon SuperIkonta 530/2 bellow cameras. I wanted to fit my cokin A filter system onto my medium format SuperIkonta to make some sweet infrared shots so I designed this adapter. It fits this…
- Downloads
- 38
- Likes
- 3
- Rating
- 0
P
PrintablesJEO
Rikon 10-324TG Bandsaw Fence & Fence Rod Safety Caps
The measured diameter of the bar is 25mm. It pressed on for me and was not loose. Could fit any bar that diameter. The fence cap is for a 4mm x 4mm “L” shape. Print screw at 100% infill.
- Downloads
- 36
- Likes
- 3
- Rating
- 0
P
PrintablesZehndiii
Santoku Cover - KuhnRikon
A cover for the Kuhn Rikon ICED santoku knife. The blade is held in place with a spring loaded lever. Use your thumb to release the blade. With your slicer you can emboss your name or a label to the side of the cover.
- Downloads
- 35
- Likes
- 2
- Rating
- 0
P
Printablesjprince
Rikon Bandsaw Fence Hanging Panel
Rikon Model 10-3061 Bandsaw Replacement Fence Hanging Panel, Rikon original part P10-306-62 continues to be out of stock. I improved on their design a bit, appears to be a bit stronger. Printed on MK4 with Prusament Galaxy Black PETG…
- Downloads
- 29
- Likes
- 10
- Rating
- 0
P
PrintablesNathan Carr
Gridfinity Kuhn Rikon Vegetable Peeler
I am getting into Gridfinity and custom bins, and made this for my kitchen drawer. It easily holds 3 peelers, maybe 4. Also added is the silhouette if you need that to do your own thing. I scanned the peeler on a flatbed scanner, moved…
- Downloads
- 28
- Likes
- 0
- Rating
- 0
P
PrintablesPeachMonkey
Throat plate for Rikon 10-326 14" bandsaw
Not much else to say. I didn't like the factory throat plate on my 10-326 so I designed a new one. This fits snug so it won't rattle out or spin when in use. FreeCAD file attached so you can tweak it for your saw as needed.
- Downloads
- 23
- Likes
- 2
- Rating
- 0
P
PrintablesWDNick
Magnetic Mounts for Rikon 10-326 Bandsaw Dust Chute
The brackets have holes for 6-7 (in each hole) of these 12mm x 3mm magnets . It will take about 48 or so magnets. The two stacks on the side that are close to one another you will want to alter the polarity so they don't oppose one…
- Downloads
- 21
- Likes
- 5
- Rating
- 0
P
Printablespaulengel
Rikon 10" Bandsaw Blade Tensioner Star Knob
With some blades I have trouble getting the last 1/2 turn to the proper tension with the stock small knob. So I designed this star knob. Since it provides so much leverage, I left it flush with the saw. That saved filament. Printed with…
- Downloads
- 17
- Likes
- 0
- Rating
- 0
P
PrintablesAndy Adams
CAMLOCK Rikon Jointer Adapter
CAMLOCK adapter for Rikon 8" benchtop jointer
- Downloads
- 16
- Likes
- 7
- Rating
- 0
P
PrintablesPaul Wolters
Kuhn Rikon Ratchet Grinder / Pepper Mill circlip Retainer/washer
this is a replacement part of the Kuhn Rikon Pepper Mill
- Downloads
- 15
- Likes
- 0
- Rating
- 0
P
PrintablesHugo Mlg
Khun Rikon Salad spinner handle
Is the handle of your Kuhn Rikon salad spinner broken ? No problem ! Print these parts and easily replace it to give your favorite spinner a second life. Instructions : Print the model with at least 2 perimeters. The centering knob must…
- Downloads
- 13
- Likes
- 3
- Rating
- 0
P
Printablesallmysparetime
Rikon 14” Bandsaw - Wrench for Spring-Loaded Toolless Guide System
Made this for a Rikon 14” bandsaw (Model 10-326). It is easy to hand tighten the thumb knobs on the spring-loaded tool-less bearing guide system but often they lock on too tight to remove by hand. This small wrench fits over top of the…
- Downloads
- 12
- Likes
- 4
- Rating
- 0
P
PrintablesTimothy Prestero
Magnetic sheath for Kuhn-Rikon Paring Knife
Goal was to make a magnetic sheath for a 10cm “colori” paring knife from Kuhn-Rikon . We lost the original sheath, and we were carrying the knife with a cork jammed on the tip so it wouldn't poke holes in the picnic bag. The design uses…
- Downloads
- 11
- Likes
- 1
- Rating
- 0
P
Printablesallmysparetime
Bandsaw Blade Alignment / Centering Tool (for Rikon and others)
Bandsaw blade alignment involves adjusting the blade so that the deepest part of the blade gullet is centered on the crown of the tire. This tool simplifies the adjustment by making it easy to see when the gullet is centered. This tool…
- Downloads
- 8
- Likes
- 1
- Rating
- 0
P
PrintablesGadsen77
Rikon slow speed grinder spacer
Needed a spacer for my new CBN wheel to work on my Rikon slow speed grinder. its very simple but maybe it could save you 10 minutes of modeling time. I printed with 5 top/bottom layers and 25% gyroid.
- Downloads
- 5
- Likes
- 0
- Rating
- 0
P
PrintablesGlen Bayley
Safety Switch Plate (Rikon Dust Collector)
This is to replace a switch plate on a Rikon Model 60-200: 2 HP Dust Collector . I never touch the switch because I use a remote . But that didn't stop the switch from failing (I cannot mechanically switch it off), which led me to unscrew…
- Downloads
- 4
- Likes
- 0
- Rating
- 0
P
PrintablesDavet01
Kuhn Rikon Pepper Mill Ceramic Grind Holder
Kuhn Rikon pepper mill has a ceramic grinder which is connected to the turning shaft by a plastic holder. While it's an excellent pepper mill, the original plastic grinder holder cracked in several places causing the ceramic grinder to no…
- Downloads
- 3
- Likes
- 0
- Rating
- 0
P
Printables
Disc sander dust/air intake cover for common combo belt/disc sanders, Ryobi, Grizzly, Rikon, and others
Disc air intake cover for a common form factor of cast iron combination belt/disc sanders with a 6-inch disc. My model is an older Ryobi BD4601, but if you have a similar model, and the under-table intake looks the same as the last photo,…
P
Printables
Rikon slow speed grinder spacer
Needed a spacer for my new CBN wheel to work on my Rikon slow speed grinder. its very simple but maybe it could save you 10 minutes of modeling time. I printed with 5 top/bottom layers and 25% gyroid.
P
Printables
Varikon tower puzzle
That's a little toy from my childhood that I was wonder, could I make it myself.. and guess, what?... I did it., What u need: 7 colors of PLA filament (PETG, if u got dey not stringing would work too.. maybe), base filament (that black…
P
Printables
Varikon tower puzzle
That's a little toy from my childhood that I was wonder, could I make it myself.. and guess, what?... I did it., What u need: 7 colors of PLA filament (PETG, if u got dey not stringing would work too.. maybe), base filament (that black…