1 / 3
Rikon 14” Bandsaw - Wrench for Spring-Loaded Toolless Guide System
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wrench to loosen the thumb knobs on the blade bearing spring-loaded toolless guide system
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 111
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Made this for a Rikon 14” bandsaw (Model 10-326).
It is easy to hand tighten the thumb knobs on the spring-loaded tool-less bearing guide system but often they lock on too tight to remove by hand. This small wrench fits over top of the thumb knob and allows it to be easily loosened.
Printer settings: Filament = PLA, Vertical shells / Perimeters = 5, Horizontal shells / Solid layers = 6, Fill density 25%, Fill pattern Gyroid, Support = Support on build plate only, Overhang threshold = 50, Style = Organic