3 point Bearing guide for bandsaw
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bandsaw guide for old trusty VEB Bandsaw
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 371
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a three roller bandsaw guide for a VEB 750 A, which replaces the pertinax guides.
You need:
5x 608z roller bearing
1x 607zz roller bearing
4x M8x20 (needs to be hex head)
4x M8 washer
4x M8 nut
2x M6x60 (needs to be hex head)
1x M6x30 (head does not matter but maybe needs to be ground down to 28mm)
1x M6 washer
3x M6 nut
I made an adapter from M6 bolt to the 7mm hole in the 607zz bearing, because M7 is not common, but the roller was a good fit. Sadly the 608z was not able to be fitted into the machine due to no room. Adapter not available as of now.
Print in PETG, 3 primeter and 25% infill.