Inca bandsaw to Henry dust extraction adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Connects your Henry vacuum to an Inca bandsaw's 53mm dust extraction outlet
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 158
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
This is an adapter to connect a regular Henry vacuum cleaner to the dust extraction of an Inca bandsaw with a ~53mm port. Mine is a 1980s “Euro 260” model, but I assume they all have the same port.
v4 is the original version and which I am using. The fit isn't quite tight enough and I'm using a strip of tape to get it to hold in place, and the tube to the Henry isn't quite long enough.
v6 is a slight improved version, but not one which I have printed and tested. It has a longer tube for the Henry, a slightly longer tube for the extraction outlet, and each tube is 1mm wider at the non-tapered end for a tighter fit. I'd recommend trying this one first.
I have included the f3d file if anybody wants to modify it. It takes about an hour to print on my Bambu P1S. No support needed, and I did it with the default 25% infill. I think it would be strong enough with a 2mm wall thickness too if you want to use less filament.