1 / 1
Inca bandsaw to Henry dust extraction adapter — image 1

Inca bandsaw to Henry dust extraction adapter

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Connects your Henry vacuum to an Inca bandsaw's 53mm dust extraction outlet

Rating
0 / 5
Likes
0
Downloads
17
Makes
0
Views
158
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Share Alike

This is an adapter to connect a regular Henry vacuum cleaner to the dust extraction of an Inca bandsaw with a ~53mm port. Mine is a 1980s “Euro 260” model, but I assume they all have the same port.

v4 is the original version and which I am using. The fit isn't quite tight enough and I'm using a strip of tape to get it to hold in place, and the tube to the Henry isn't quite long enough. 

v6 is a slight improved version, but not one which I have printed and tested. It has a longer tube for the Henry, a slightly longer tube for the extraction outlet, and each tube is 1mm wider at the non-tapered end for a tighter fit. I'd recommend trying this one first.

I have included the f3d file if anybody wants to modify it. It takes about an hour to print on my Bambu P1S. No support needed, and I did it with the default 25% infill. I think it would be strong enough with a 2mm wall thickness too if you want to use less filament.