Clamp Rack for 2.5" Throat Bessey Tradesman Series F Clamps TGJ2.5[xx]
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Clamp rack specifically designed for the (outstanding) Bessey Tradesman TGJ series F clamps with a 2.5" throat depth.
- Rating
- 5 / 5
- Likes
- 55
- Downloads
- 264
- Makes
- 1
- Views
- 1,672
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This clamp rack was specifically designed to hold the (outstanding) Bessey Tradesman's TGJ series F clamps with a 2.5" throat. To see my version with a 4.0 inch throat, see here.
Clamps are retained securely in a small recess modeled into the rack, but clamps come out effortlessly when you pull the handle toward you because doing so lifts the clamp out of the recess. Designed to be ultra compact to maximize shop space. There is a mere 2mm between the wider +2K style polymer handles. You can grab one clamp at a time without needing to be careful, but you can also grab multiple clamps at a time with one hand. They're literally perfect. Mounting holes are sized for #8 flat head screws.
My print settings were 3 bottoms, 4 tops, 4 perimeters, .4 nozzle .2 LH, Adaptive Cubic 25% PLA. It's about right considering the mass of the payload.
This model fits the clamps with a 2.5" throat.
My Festool clamps also fit into the 2.5" version of the rack.
The specific Bessey model numbers the rack was designed for are:
TGJ2.5[xx] and TGJ2.5[xx]+2K models where [xx] is the length.
e.g. TGJ2.506+2K (06 inch bar, 2K polmer handle), TGJ2.512 (12 inch bar, classic wooden handle) etc.
TGJ series are are sometimes called "Bessey Light Duty Woodworking Clamps", which is ironic since they are more stout than almost every other F clamp I've used.