1 / 2
Clamp Rack for 2.5" Throat Bessey Tradesman Series F Clamps TGJ2.5[xx] — zdjęcie 1
1 / 2

Clamp Rack for 2.5" Throat Bessey Tradesman Series F Clamps TGJ2.5[xx]

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Clamp rack specifically designed for the (outstanding) Bessey Tradesman TGJ series F clamps with a 2.5" throat depth.

Ocena
5 / 5
Polubienia
55
Pobrania
264
Wydruki
1
Wyświetlenia
1672
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

This clamp rack was specifically designed to hold the (outstanding) Bessey Tradesman's TGJ series F clamps with a 2.5" throat.  To see my version with a 4.0 inch throat, see here.

Clamps are retained securely in a small recess modeled into the rack, but clamps come out effortlessly when you pull the handle toward you because doing so lifts the clamp out of the recess.  Designed to be ultra compact to maximize shop space.  There is a mere 2mm between the wider +2K style polymer handles. You can grab one clamp at a time without needing to be careful, but you can also grab multiple clamps at a time with one hand. They're literally perfect.  Mounting holes are sized for #8 flat head screws.  

My print settings were 3 bottoms, 4 tops, 4 perimeters, .4 nozzle .2 LH, Adaptive Cubic 25% PLA.  It's about right considering the mass of the payload. 

This model fits the clamps with a 2.5" throat.
My Festool clamps also fit into the 2.5" version of the rack. 

The specific Bessey model numbers the rack was designed for are: 
TGJ2.5[xx] and TGJ2.5[xx]+2K models where [xx] is the length.  
e.g. TGJ2.506+2K  (06 inch bar, 2K polmer handle),  TGJ2.512 (12 inch bar, classic wooden handle) etc. 

TGJ series are are sometimes called "Bessey Light Duty Woodworking Clamps", which is ironic since they are more stout than almost every other F clamp I've used. 

 

Tagi