Fix filament Jam issue with E3D V6 by changing full metal 1.75 mm throat to 4.1 mm bore throat
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hello fiends, In my anet a8 recently i changed from direct drive to bow den setup with E3D v6 hotend. The hotend which…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 9
- Makes
- 0
- Views
- 339
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
Hello fiends,
In my anet a8 recently i changed from direct drive to bow den setup with E3D v6 hotend. The hotend which i purchased having 1.75mm full metal throat. While printing the filament jams and prints were wasted. I fed up with this problem and tuned retraction settings but problem remains same.
I thanks to Mr Andre_action Instagram profile who helped me to understand the issue.
Now i changed the throat with 4.1 mm bore the video how i changed the throat is uploaded to youtube check out below link.
Now the problem is completely solved and the printer is now printing like charm.
Category: 3D Printing