Fix filament Jam issue with E3D V6 by changing full metal 1.75 mm throat to 4.1 mm bore throat
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hello fiends, In my anet a8 recently i changed from direct drive to bow den setup with E3D v6 hotend. The hotend which…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 339
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Hello fiends,
In my anet a8 recently i changed from direct drive to bow den setup with E3D v6 hotend. The hotend which i purchased having 1.75mm full metal throat. While printing the filament jams and prints were wasted. I fed up with this problem and tuned retraction settings but problem remains same.
I thanks to Mr Andre_action Instagram profile who helped me to understand the issue.
Now i changed the throat with 4.1 mm bore the video how i changed the throat is uploaded to youtube check out below link.
Now the problem is completely solved and the printer is now printing like charm.
Category: 3D Printing