128 models
This is deceivingly hard 8 piece durable puzzle box designed to be difficult to solve and simple to print. Any rigid material should work. However 2, 5mmX1mm circular MAGNETS ARE NEEDED. Other than that and a little glue it's ready to…
Use 608 bearings in the middle and print some cover handle things from other fidget spinners depending on preference. Also be careful as the corners are sharp and may be sanded down if you want to.
smol absolute solver. i made it into a pin
Navigate your way through a series of 30 puzzles, from easy to nearly impossible. Can you slide and shift the blocks to successfully free the big block? The game comes with a dedicated storage compartment at the top of the board to house…
I got a shirt that inspired me to make this sign. There are 4 versions, some with letters protruding, some with letters cutout, some with mounting holes, and some without mounting holes.
Source: https://www.models-resource.com/mobile/thesevendeadlysinsgrandcross/model/66942/
If after installing my “ Z-Axis Stepper Motor Mount with integrated Axial Thrust bearing ” mod, you still have Z banding on your E3, this should fix any remaining issues. These mounts allow the correct vertical motion to be obtained while…
Core requirements Stand-alone (no PC; no smartphone) Nice looking (minimum cable; solid standing; no “gimmics”) Should work for all cubes (typical size 2”), in any sticker configuration (pure color; no pattern) Should work in difficult…
the absolute solver symbol from the indie animation show Murder Drones made by Glitch productions
Ein Einkaufswagenlöser sowie ein Anschnall Dummy in eins. 100% Infill 3 Walls
This will keep your Speed Editor dust free and protected when sitting on your desktop, or if you want to toss it in a bag for travel. The tall version is a one piece print that's the height of the jog wheel. The thin version is a two…
This is a simple sight inspired by the absolute solver from the show murder drones. Print with front facing down!!!
I couldn't abide an inaccurate cube, so I used a real one and mixed it up as a reference for the mixed version. Of course, the solved version has correctly assigned colors, too. This will require a machine with 7+ colors, such as a…
container for one small 20gr chlorine tablet to dissolve (but dependent on many external factors) over +- 1 week. Same tablet dissolves without the container in 3 days with chlorine levels too high. This container slows down the process,…
I modified on (MK3S/MMU2S Modified extruder-idler-mmu2s1 - Solves IR Filament Sensor Issues_by Sneaks) to make the arm sensor longer, and it worked fine when I test it. Give it try !
Needs supports
Hi, It seems that I got lead screw that it not 100% perfect and I was experienced errors in prints related to Z wobble that Official TR8*4 Anti-Backlash Nut Block could not solve. After tightening official Anti-Backlash Nut Block issue…
there's already lots of absolute solver models on printables but here's mine anyway
This one, designed by Props3DPro was found on thongiverse under: https://www.thingiverse.com/thing:4825875 I printed it with 0.6mm nozzle in 0.4mm layerheight and 60mm/s. It is printed in petg and fits nice as expected.
Funny Sign - Beer May Not Solve Your Problems, But Neither Will Milk or Water Complete with recesses for 10mm x 1mm magnets to make the sign easily mountable on any flat ferrous surface. One of the files is a multi-object file to make it…
Protector designed for carton spools of Extrudr Filament to avoid dust and debris from turning on outside spool holder
The record so far: 1.260 second ! Disclaimer Despite being inspired by different robots, the model presented below is entirely from my imagination. It represents many hours of work. I am very happy to share it with you, but I ask you to…
Simple Skadis holder for common 61.5mm diameter solvent squeeze bottles. This model requires M2.5 heat-set inserts, M2.5 screws, and printed hooks. Required Parts Printed hooks See linked project for more details M2.5 heat-set inserts CNC…
Problem solver Nextruder Heaterblock, Hotend, Nozzle, mounting angle (Prusa XL multi-tool) It says in the Prusa assembly manuals "Rotate the heating block as shown in the picture. The angle must be approximately 35° - 40° to avoid…
This housing is for the new Stream Deck Module 32-key: https://www.elgato.com/ww/en/p/stream-deck-module-32-keys It's designed to sit at the same level and angle as the DaVinci Resolve Mini Panel. The Stream Deck Module simply slots in…
Simple aesthetic badge for Atmos CPU water cooler. Printing Print the main body with your preferred color filament. The diffuser and connector are supposed to be printed in white or semi-transparent color. All parts can be printed without…
Protector is designed for carton spools of Extrudr Filament to avoid dust and debris from turning on inside spool holder
To create an involute gear we only need three parameters, the module which determines the length of the teeth, the number of teeth and the pressure angle. With these parameters we can determine the Pitch Circle, Addendum Circle or Top…
Simple Skadis holder for common 60mm diameter solvent pump bottles. This model requires M2.5 heat-set inserts, M2.5 screws, and printed hooks. Required Parts Printed hooks See linked project for more details M2.5 heat-set inserts CNC…
Würth Einkaufswagenlöser
2 bottle holder for 8 oz createx solvent bottles.
A solver ring make sure to scale it for you finger or whatever your putting it on its quick to print if its small
Printed in PETG (PLA should also work); 0.2mm; 0,6mm nozzle Support is needed for the hooks on the rear of the holder.
This hood is designed as a solvent trap for samples being tested on Anton Paar rheometers that have volatile solvents. The design has been tested successfully and provides sample stability for at least 24 h. Note: Please remember to seal…
Model made in TinkerCad abt 2 1/2 x abt 3 inches 6 mm tall Credits to GLITCH for the main design Model by me
Internal magnets have been added so that the pieces are placed precisely and quickly. The magnets are neodymium. Its dimensions are 10x2 mm. I have marked the magnets so as not to lose their polarity. The gap in the game has also been…
Essentials for hand: Glue for assembly Pair of Black Gloves https://www.amazon.com/gp/product/B0DD3HTPWZ/ref=ewc_pr_img_3?smid=A2E3VXFBA6RD5C&th=1 Necessary for Electronics: 130 DC Motor…
Entriegelt den Einkaufswagen beim einkaufen. empfohlene Füllung = 60-80% Nahezu alle Filamente sind geeignet. Auf flexible Filamente wie TPU sollte verzichtet werden. Unlocks the shopping cart while shopping. recommended filling = 60-80%…
Hi, since I also have a CR-10S Pro was experiencing the issue with the PTFE Capricorn tube was pushed out of the PC4-M10 longer hrs of printing. This seems to be a combination of the softer Capricorn tube and the quality of the PC4-M10…
Attention: I keep seeing people selling my models on Esty and eBay: Digital files and actual prints. Please STOP that! I will pull these off here if this keeps happening. I put these up for the benefit of the community. Not the monetary…
This is how to use the original you use my design exactly like that
K1 Max geared hinges door top gap solver with a mount for the Mijia Bluetooth Hygrothermograph 2 (LYWSD03MMC)
This is a variation of a common “ring in cuffs” wire puzzle. My decision to stylize this and not use round objects cost me a lot of time while designing this and also makes it slightly more difficult to use. Perhaps a good thing for some…
*** Be aware that there is no way back, takes time and money - consider buying new printer first. But I'm happy now and that what counts *** *** Discord to exchange knowledge and ideas as we keep improving IFast —…
Davinci Resolve Speed Editor stand. You have to print in two copies. The protrusion on the stand is used to block the slide, by fitting it into the hole with the screw. In my opinion, it improves the ergonomics of working on the speed…
Tessellations were used by the Sumerians (about 4000 BC) in building wall decorations formed by patterns of clay tiles. Nowadays, mathematicians try to solve tesselation rules and try to find more possible arrangements. One of the…
Absolute Solver from Murder Drones, this is a multi colour designed model. ready to print import it into bambu labs select your colours and hit print. No supports or special requirements except a multicoloured printer. Enjoy!
Cover to protect you precious Speed Editor for DaVinci Resolve from Blackmagicdesign. It even has space for a USB Cabel, if you ever have to charge the Speed Editor on the go. To Secure the cover on the device I designed a slot in the…
This is a simple yet accurate and cool sight inspired by the absolute solver from the show murder drones. Print with front facing down. If you want picatinny go here:…
A puzzle box where you can't see the maze. It is cut into the inner core and the lid covers it completely. Two pins inside the lid run through it, so you have to find the way out blind by twisting and lifting the lid. Made to feel smooth…
Small holder designed to hold a 10ml (or larger) spray bottle. The idea was that I was using up a lot of IPA/Meths just in a rag when wiping down my bed but 2 sprays from the bottle was more than enough for my needs. Search "10ml glass…
A Silly Shell absolver, for blasters with LOTS of air power, and people who like big shotgun blasts. works pretty well with a titan, but it's not perfect.
Thing that Devours and Dissolves. You can go to https://www.patreon.com/Schlossbauer if you want earlier access our to sell my work. Category: Creatures
Kleines Gadget für den Schlüsselanhänger zum lösen vom Einkaufswagen.
llavero del absolute solver, se imprime en plano sin soportes
Put the cylinder into the base Remove it without grabbing the cylinder with your fingers or turning the stuff down ! On of the letter on the base give you the answer Infille of 5 to 10 % is enough The picture is an old version with an old…
Saw this in a YT video. Seems easy but will take you some time. Goal is to create a symmetric pyramid. There are two unique solutions. Can you find both?
If you find yourself reaching for the knobs below the screens often, but they seem just a tad bit too short to be comfortable to use, I've got you covered! These extentions should pressure-fit right onto the existing knobs, and if you…
This funnel is particularly useful for scale modellers who use acrylic paints use ultrasonic cleaners for their tools (usually airbrushes) with some kind of solvent I use an ultrasonic cleaner to clean my airbrush (and other tools) with a…
Small rubiccube beads for shoelaces or hoodie strings.. Maybe backpack strings. It has 3 main orientation for the hole in it: Vertical Diagonal Corner to corner You can also find solved, and scrambled versions in the 3mf files! The…
You need a: 130 dc 12v motor like from https://www.amazon.com/AEDIKO-Magnetic-Brushed-Electric-Control/dp/B0GYCJ19XF/ref=sr_1_1?crid=35NJ1RSDFQ8NP&dib=eyJ2I Switch like one from…
Greater Thing that devours and dissolves. You can go to https://www.patreon.com/Schlossbauer if you want earlier access our to sell my work. Category: Creatures
This model fits standard Kimwipe boxes, as well as push-to-dispense alcohol bottles and the modular tape system. Gridfinity allows the whole organizer to fit your existing gridfinite organization scheme. The modular tape system has been…
https://www.youtube.com/watch?v=J--QVhGheP4
The 2-part plate, included here, is intended to allow people to build a fully assembled “SPIES” puzzle by Alfons Eyckmans, without revealing the solution. This permits the builder to then discover how to take apart the puzzle. This can be…
A Silly Shell absolver, for blasters with a lot of air power, and people who like big shotgun blasts. Works very well with my titan.
Engineers like to solve problems
I just love Murder Drones so much.
Our PÅHL Desk from IKEA was askew due to the carpet. I fixed it with Fusion360. The file is parametric, i.e. you can fit the dimensions in Fusion 360. Also suitable for many other furnitures. Printed with FLEX and 0.6 Nozzle on a PRUSA MK4
Design Concept: Number Craft is a 3D-printed remix of classic math manipulatives, bringing the spirit of SumBlox into the blocky world of Minecraft. Each number is scaled to represent its value physically: taller numbers = higher value.…
Hanging Rack for 3 solvent bottles in a fume hood. Also a generic hanging rack for lab supplies
The key is based off the Esc key. One key to solve all.
made to look cool and catch condensation from your drink! (along with another :D)
Update: Took forever, but I've finally updated these. After feedback, ID of the "barrels" has been increased to 13mm to try for a better fit. This means the shells can no longer fit inside 1.5" PVC pipe due to the overall increase in…
They will never know my “cyn”
I made a Murder Drones Absolute Solver Coaster. It's 70mm diameter with a 3mm base and a 1mm graphic I attached the .STEP file so people can fiddle with it as they please. I made it in onshape, so hopefully it'll work in other CAD…
According to Prusa3D FDM printer machine cleaning guide suggestion, it's better use >90% or 95% concentrate IPA (I sopropyl Alcohol) to clean the Spring Steel Sheet…
Once the brush is removed from the cap an placed into the brush holder, the brush bulb will stop the brush from falling into the container.
This is a simple tag made to identify HPLC lines in a quaternary system (up to 4 lines). How it works: Paint the letter with a permanent marker and attach the tag to the line, its made to tightly fit a 3mm line (from bottle to pump),…
hewooo Murder Drones friends and fans Serial Designation Mint here to tell you about these awesome key chains i designed , if your someone who wants to consume the planet or just trying to get revenge or just an emo purple gremlin you can…
Einfach in die Bohrungen 5x1 Neodym Magnete einsetzen und man hat einen Deckel für unterwegs.
I designed it for kids in a mini escape room/save Christmas sort of game. It spells a word when solved. Harder than it looks. Must print the top color in red or it won't work. I included a presliced file for Prusa Mk3S with color change…
I saw a sticker somewhere that was basically this text. Every letter, image, etc is a separate object so you can change colors to what you want. I did group them by a prefix such as WH for white, GR for green, etc. so assigning extruders…
Deckel Lid für https://www.printables.com/de/model/599449-slidesolver-sliding-puzzle-game-with-30-different- Einfach in die Löcher 5x1 Neodym Magnete einkleben und in das Original GameBoard die Gegenstücke. Evtl. erstelle ich einen Remix…
A puzzle with 3 layers that gives you a secret text when resolved. Remember that you can also turn the pieces on the other side, i.e., They don't have to be placed on the side as they were printed. Printing recommendations: The basic…
I would like to present you 3d Puzzle game in Pumpkin shape - great idea for the Halloween decor or gift! The puzzles are more complicated as shapes are 3d and with slanted walls (different angles!) - the same makes the Puzzles more…
If you're one of the crazy ones who doesn't use the trackballs and they get in the way, why not replace them with these? (I've moved my whole operation over to DCTLs) These rings still allow to control the Y channel by interfacing with…
I suggest adding small rubber strips underneath the two connectors for better friction
Directions for use: Slide the directional arrow piece onto the cable Fit connector piece onto usb end Slide directional arrow piece back onto the connector until you hear a click Remember which side of the connector the arrow is on for…
Allows the use of a bottle as a solvent/jag trap. Models included have standard bottle thread to M14x1 & M18x1 barrell thread.
sight add-on for solver sight from Creepposter64 second model needed here this is purely optional, and you can just print the solver sight, but I think they work nice together.
Got across the original upload by mattstudio, saw that a lot of people printed it in multiple colors, but the files were not splitted into multiple parts, modified them myself and thought, why not upload them? The challenege cards are not…
I had all my tubes and small bottles in a plastic tray where they just slid around. I decided to make this tray to hold them vertical where they are easy to see and will last longer. The pockets are 20mm x 20mm, 30mm x30mm, 50mm x50mm,…
Updated: Barrel size has been increased to 13mm for a better dart fit and shell OD has been decreased slightly to 72mm for tolerances in 2.5" PVC fittings. There are two versions: 19shot_13mm_shell_insert - Just the barrel pieces. For if…
This hanging holder is designed for the Bambu Lab P1S and provides space for a build plate cleaner and solvent bottle . It is based on Build Plate Cleaner Microfiber Holder . build plate holder is the: Build Plate Side Holder for P1S…
High recovery solvent reservoir for robotic liquid handeling in 96-well plate format. Also a two channel devision. Fusion360 file has the division as a separate object so that it can be moved to make a division in any location. Category:…
