1 / 2
Clamp Rack for 4" Throat Bessey Tradesman Series F Clamps TGJ4.0[xx] — image 1
1 / 2

Clamp Rack for 4" Throat Bessey Tradesman Series F Clamps TGJ4.0[xx]

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Clamp rack specifically designed for the (outstanding) BesseyTradesman TGJ series F clamps with a 4.0" throat depth.

Rating
0 / 5
Likes
17
Downloads
155
Makes
0
Views
884
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — NoDerivatives

This clamp rack was specifically designed to hold the (outstanding) Bessey Tradesman's TGJ series F clamps with a 4.0" throat.  To see my version with a 2.5 inch throat, see here.

This clamp rack was specifically designed to hold the (outstanding) Bessey Tradesman's TGJ series F clamps.  Clamps are retained securely in a tapered recess modeled into the rack which fits the taper of the clamp itself.  Clamps come out effortlessly when you pull the handle toward you because doing so lifts the clamp out of the recess.  Designed to be ultra compact to maximize shop space.  There is a mere 2mm between the wider +2K style polymer handles. You can grab one clamp at a time without needing to be careful, but you can also grab multiple clamps at a time with one hand. They're literally perfect.  Mounting holes are sized for #8 flat head screws.  

My print settings were 3 bottoms, 4 tops, 4 perimeters, .4 nozzle .2 LH, Adaptive Cubic 25% PLA.  It's about right considering the mass of the payload. 

The specific Bessey model numbers the rack was designed for are: 
TGJ4.0[xx] and TGJ4.0[xx]+2K models where [xx] is the length.  
e.g. TGJ4.008+2K  (8 inch bar, 2K polmer handle) or  TGJ4.016 (16 inch bar, wooden handle)

TGJ series are are sometimes called "Bessey Light Duty Woodworking Clamps", which is ironic since they are more stout than almost every other F clamp I've used. 

 

Tags