1 / 2
Enhanced Zero Clearance Throat Plate for Laguna Fusion F1/F2/F3 with Improved Dust Collection — image 1
1 / 2

Enhanced Zero Clearance Throat Plate for Laguna Fusion F1/F2/F3 with Improved Dust Collection

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Achieve dust-free, tear-out free cuts with this custom-designed zero clearance throat plate for your Laguna Fusion table

Rating
5 / 5
Likes
19
Downloads
198
Makes
1
Views
715
Reviews
1

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — Share Alike

Upgrade your Laguna Fusion F1/F2/F3 table saw with this customizable 3D printed zero clearance throat plate, now featuring enhanced dust collection.

  • Improved Dust Extraction: Additional air holes strategically placed throughout the design provide superior airflow, ensuring efficient dust removal without compromising on zero clearance.
  • Easy Assembly: Designed to fit a standard 220x220mm print bed in two pieces for efficient printing.
  • Hardware Compatibility: Utilizes existing factory hardware from your original throat plate (if desired).
  • Fine-Tuning: Print tolerances are intentionally tight for a snug fit. For perfect fitment, consider minor scaling adjustments (+/- 0.5%) for your saw.

Detailed Assembly Guide:

  • Dry-fit both halves and adjust the back section under the 6 teeth for a smooth fit (sanding or light filing may be necessary).
  • Secure the halves permanently with superglue for a strong and reliable throat plate.
  • Ensure both halves are printed with the same orientation to minimize printer variations.
  • The 60-degree chamfer on the back teeth accounts for minor dimensional discrepancies, allowing for smooth operation.

Recommended Printing Settings:

  • Filament: PETG (stronger and cuts cleaner/safer than PLA)
  • Layer Count: 4 walls, 5 top layers
  • Infill: 20% infill (enhances rigidity and durability)
  • Layer Height: 0.2mm
  • Infill Type: Gyroid
  • Supports: Yes
  • Top Z Contact Distance: 0.1mm (This makes the undersides smoother)

Calibration and Installation:

  • Assembled throat plate should fit snugly in your table saw.
  • Remove riving knife and lower the blade to its minimum height.
  • Insert the throat plate, then slide the fence over it with a half-inch gap from the riving knife slot.
  • Always wear eye and hearing protection.
  • Slowly raise the blade through the throat plate while the saw is running.
  • Congratulations! You've created a zero clearance throat plate for improved cutting performance and dust collection.

Tags