1 / 2
Enhanced Zero Clearance Throat Plate for Laguna Fusion F1/F2/F3 with Improved Dust Collection
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Achieve dust-free, tear-out free cuts with this custom-designed zero clearance throat plate for your Laguna Fusion table
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 199
- Wydruki
- 1
- Wyświetlenia
- 717
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (39)Powiązane
Upgrade your Laguna Fusion F1/F2/F3 table saw with this customizable 3D printed zero clearance throat plate, now featuring enhanced dust collection.
- Improved Dust Extraction: Additional air holes strategically placed throughout the design provide superior airflow, ensuring efficient dust removal without compromising on zero clearance.
- Easy Assembly: Designed to fit a standard 220x220mm print bed in two pieces for efficient printing.
- Hardware Compatibility: Utilizes existing factory hardware from your original throat plate (if desired).
- Fine-Tuning: Print tolerances are intentionally tight for a snug fit. For perfect fitment, consider minor scaling adjustments (+/- 0.5%) for your saw.
Detailed Assembly Guide:
- Dry-fit both halves and adjust the back section under the 6 teeth for a smooth fit (sanding or light filing may be necessary).
- Secure the halves permanently with superglue for a strong and reliable throat plate.
- Ensure both halves are printed with the same orientation to minimize printer variations.
- The 60-degree chamfer on the back teeth accounts for minor dimensional discrepancies, allowing for smooth operation.
Recommended Printing Settings:
- Filament: PETG (stronger and cuts cleaner/safer than PLA)
- Layer Count: 4 walls, 5 top layers
- Infill: 20% infill (enhances rigidity and durability)
- Layer Height: 0.2mm
- Infill Type: Gyroid
- Supports: Yes
- Top Z Contact Distance: 0.1mm (This makes the undersides smoother)
Calibration and Installation:
- Assembled throat plate should fit snugly in your table saw.
- Remove riving knife and lower the blade to its minimum height.
- Insert the throat plate, then slide the fence over it with a half-inch gap from the riving knife slot.
- Always wear eye and hearing protection.
- Slowly raise the blade through the throat plate while the saw is running.
- Congratulations! You've created a zero clearance throat plate for improved cutting performance and dust collection.