Counting matching models…
Der original Drehknopf lässt sich schlecht greifen, erst recht mit Handschuhen. Hier eine verbesserte Version: Nicht glatt sondern geriffelt, etwas größer und mit schwarzem Index. Der Knopf wird einfach auf den alten Knopf gesteckt.…
Cover for an original HDZero Whoop VTX. Break off tabs and put over VTX, print retains MIPI and U.FL
Housing for the ZERO-DISP-7A touchscreen from Waveshare I tried to make it as compact as possible and to keep it as simple as possible. Total height is about 25mm Recesses for display control buttons on the side. There are 2 slotted holes…
It's a simple case for the Flipper Zero 3-in-1 Expansion Board Parts needed to build one 4x M3x10mm Screws
Aleph Zero is a layer-1 blockchain offering scalable, secure, and low-cost solutions with near-instant finality and ZK privacy. Ideal for Web3 apps across DeFi, gaming, and enterprise. Learn more: https://alephzero.org/
Screen Housing Model for Anycubic Kobra 2 Neo 3D Printer with Integrated OrangePi Zero 2W Board
Update 11/15/24: It was made aware that I did not include the PTFE connector that was used/fits with this adapter. Please see this amazon link:…
Just added a DIN Rail mount to the middle part for industrial mounting also made some printability improvements Category: Electronics
Designed from scratch, but very aesthetically compatible with the existing Voron Zero skirts. Fits in the 100mm gap that you add if you swap all the y extrusions from 200mm to 300mm. Why did you do that? Who cares!
I have two problems with the stock mercury one.1 tower: They stick out from the back and under heat and stress they bend, this make the belt rub on the idler, causing excessive wear and tear. The latter could be explained by my poor…
120mm auxiliary part cooling fan designed for a ZeroG Mercury One.1 370 (Non-Hydra) that may also work for Ender 5 and 5+'s. The ducts have optional heat set inserts for strength. You need to close the holes if you don't use the inserts.…
This is an enclosure for an MT32 Pi using a Pi Zero 2W and the MT32 Pi Hat sold by Yavimaya Maker at: https://www.tindie.com/products/taviens/mt32pi-hat-for-zero-2w-model-raspberry-pi/ It's based on the one they created, but it has a…
This is a remix of the Raspberry Pi Zero frame for Einsy Rambo by Prusa Research . The original only fits the Raspberry Pi Zero, but this frame fits Raspberry Pi Zero W as well as Raspberry Pi Zero 2 W. (The Zero 2 has components in…
Zero Clearance Insert for Harbor Freight Hercules 10" Table Saw This is a zero clearance insert for the Harbor Freight Hercules 10 inch table saw. You will need to cut the blade slot for the table saw first until the riving knife begins…
This is an internal bracket for the Anycubic i3 Mega Pro that replaces the existing SD card reader with a mount for a Zero 2W formfactor SBC (Rasberry/Orange/Banana, etc.), allowing the Pi's microSD card to be accessible from outside (for…
A case for the Flipper Zero, using the foam inserts that come with the package. No additional hardware is required, just a bit of filament for the hinge. It also features pockets for 6mm x 2.6mm (usually sold as 3mm) magnets but it'll…
Raspberry Pi Zero DIN RAIL Mount Bracket - Staffa installazione Pi Zero su barra DIN 7.5mm Suitable for: DIN RAIL 7.5mm IEC/EN 60715 TH 35 - 7,5 https://www.printables.com/model/885933-desktop-din-rail-stand-7590-degrees-supporto-barra…
This is a small case for the light sensor BH1750 which can be plugged into the Flipper Zero's GPIO pins. The BH1750 can be wedged into the slot and then wired to a tree and a two pin Dupont Connector which fit into the cutouts on the…
This is a collection of zero height gridfinity refined bins. bins without walls (and floors - see note). They make for nice flat filling. they make for easy widget making (build stuff on top - I included solidworks files since there…
A model to mount a Radxa Zero 3W running OpenIPC onto the HDZero Goggles. Space for 3x 8812EU rx wifi cards and 6 sma antenna holes.
Niche Zero holder for Sage/Breville 58mm portafilter. Uses the original screw to securely attach to the grinder. It is an elegant way to grind directly into a portafilter with a Niche Zero grinder. There is also enough space to fit any…
Basce created for pi-hole In the future I will create and add the upper part of the case
This is a project I've been working on for some time now; It contains a Pi Zero, a thermal printer that can print stickers, a pi camera, a 1200mah 2s lithium-ion battery, and some power circuits. A short press on the green button takes a…
Update 5/12/25: have been running the feet about a week now, much sturdier than the stock feet and less wobble. 40mm riser feet for the Sovol Zero. Print the foot in something sturdy (ASA/ABS/PET/PC), print the pads in TPU for grip. 95A…
Improved belt locking blocks for the stock SV08/Zero toolhead carriage. More adjustable, less of a pain to replace when doing toolhead/motion system maintenance. Improves belt parallelism to X beam. Use the strongest material you have…
Use a piece of filament for the hinge. The device is working ok for smaller files 720p 1080p h264. I would say max 5gb files. Mild overclock is necesary, libreelec and a light theme for kodi like quartz. Disable all animations etc, hw…
Overview Bolt-on adapter lets you mount a stick-vac HEPA filter to your printer’s existing carbon/fan box screws. The aim is to cut airborne particles and fan noise while printing. The filter press-fits into the adapter and includes a…
I recently picked up a Sovol Zero for some high speed printing and was disappointed in the stock screen / knob interface, as well as the Factory Sovol 5 inch screen upgrade (which works perfectly, but just looks weird being so large on…
Case to protect your HDZero Box Pro. As an addition you can also store a VRX inside this box. The VRX space is designed for the RunCam WiFiLink VRX (please try OpenIPC or RubyFPV!) But a Walksnail VRX will probably also fit. The Inlay and…
This project turns an RP2040-Zero into a feature-rich GPS speedometer and trip computer. It tracks speed, distance, time, and location data Check the full project on PCBWay!…
This remix of Clifton McMorris' (@CliftonMcMor_1416112) model has several key improvements: Solid kerf cut area in the middle of the print provides a clean and dense area for the sawblade to cut the initial kerf Increased height (scaled…
I changed the handle to get a better grip and a keychain in both sides I changed the clip to be more resistence and str
Remove the accent bit on the left side of the printer, reuse the two screws to attach the housing. Oh, put the housing on BEFORE mounting the screen, or you'll be doing it twice :D I was able to fit it on my Zero, barely. Have to print it…
I used a piece of EPDM P-shaped sealing strip between the printed adapter and the fume extractor. Mounting screw 4,2x32 mm, Clas Ohlson 40-9564-14
arm mount for the chonky ELRS antennas that come with the HDZero Stack. made for the B-Line Forty5.
I wanted to make a Raspberry Pi Zero-based internet radio, which now works nicely and is called ‘PiZeRadio’. This model provides a case to hold the Pi Zero, a PCM5102 Digital Analogue Converter (DAC), and outputs to a pair of RCA red and…
Zero clearance inserts for Bosch PCM 8S sliding mitre saw. Inserts are intended to use only when saw is in vertical position, for other angles please use original inserts. For dimensions please see diagram, printer with table at least…
These are two zero clearance inserts for the Harbor Freight Central Machinery 9in Band Saw. I did have to lightly sand the edges for it to have a snug fit.
This is a easier to print cover for the Sovol Zero toolhead. I created this so I could have a custom cover using the Original Parts. The Screws for the fan may need to be replaced with some plasic self-tapers and washers. I am Including…
***********30/6/2026: revisiting this again, will add mounting locations the same as the FT panels, so that you can simply use a longer screw. Will upload the original panel as a whole so that you can just use your slicer to split it into…
Summary This is a storage box used to store all the extra parts your Kotobukiya Rockman Zero kit comes with. It doubles as a life bar effects piece that can be displayed along side your model. Options The box is a fully upgraded “32 pip”…
This holder/dock is designed to be installed on the front leg of the Altmill CNC machine. The holes in the dock align with the front top two holes of the Altmill 4X4 leg. I only have a sample size of one. Use 4mm or 8-32 screws to mount…
Hi, im sharing with you Printer.cfg for my Anycubic Mega Zero 1.0 (it should work with 2.0 also) Please like and write comment or even create make to support me! The Printer.cfg file is in Other Files section It is configurated to work…
I added access to the two micro USB ports on the back and shifted the opening for the screen to align with the waveshare 3.5 in LCD. Also, added tabs so that the lid clicks and stays in place.
I modified the object after printing to fit a distanced rasPi because I bought the version whit all pin
The smaller USB Zero Delay Encoder variant.
You can put a spring (extruder P1S Spring) between the PEGT Washer and the patch part. M3 screw and bolt to complete the build. Original HDZero rail adapter : https://www.thingiverse.com/thing:5621199
This model is to provide a good looking functional case for the Waveshare ESP32-S3-Zero board to be operated by AA batteries. While this was specifically developed for the [ESP Rowing Monitor](https://github.com/Abasz/ESPRowingMonitor)…
Since the Flextailgear Zero pump does not ship with a Decathlon valve compatible adapter, I designed my own by measuring the existing adapters and the pump bag nozzle of my Deca mat. Print upside down, use TPU. The nozzle as is will…
Vertical case with airflow from the base for a small 4x4mm fan that can be controlled from any GPIO. Also suitable for passive ventilation due to its top air outlet. The front panel is very thin and can cause problems when printing in two…
Works with 1515 extrusions and any panel dimensions. You just need 10mm bar or pipe of any material. I used AL bar, but wood or plastic should be fine too.
100mm high, thicker walls, split in 4 pieces, every pieces can be printed on your zero, i added a optional spool roller. You need at minimum 6 pom wheels to be functional, i used 12, the spool always stay on the right-rear corner so you…
Disclaimer: The Nevermore Micro V4 is a superior choice, it moves significantly more air than the MF Nano using the same fan, and its form factor fits the rear enclosure wall perfectly. I recommend building it instead. This is a remix of…
I added a USB to accept the adapter linked below and a standard Ethernet keystone port. https://www.amazon.com/dp/B0BDWV1BCV?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
Full Image Catalog The complete gallery of my works can be found at www.marjers.com . You can search by the file’s reference number or simply click the preview image to open it directly. This is a high-quality 3D design optimized for…
Simple logo saying “ZERO DRAM” (in Polish, EN: “NO DRAMA”). 0.2 layer height, 15% infill.
Ive seen similar designs that go under the top rails of the frame and require different ptfe tube mounts etc. I didnt like that and I wanted maximum shine from that sweet sweet rgb! SUper easy print use voron settings, 4 walls 5 top and…
This is a wall mount case designed for a Raspberry Pi Zero running aqualinkd pool controller services ( https://aqualinkd.github.io/ ) using a HAT designed for RS485 communication and 5v power. This case can be utilized with any Pi Zero…
There are other enclosures / cases meant for different e-ink/e-paper displays. The only thing special about this one is that it is meant to fit the Inland (Microcenter) e-ink display module , and a Pi Zero 2 W with a 40-pin header .…
⚠ Note: These parts are printed in ABS with tight fits . ABS shrinkage and warping can affect tolerances, so proper filament tuning is essential. We strongly recommend watching our filament tuning video before printing. Before you start…
I generally don't like it when the sensor is so close to the housing. This simple mod makes loading and unloading the filament much more convenient and reduces bending in the filament path. BOM: 1x M3x50 Take a look at the photo gallery.…
Models included are: 15cm with finished end 15cm with zero end for end measurements 15cm / 6in with finished end 15cm / 6in with zero end for end measurements Printed with a color change for the legend. Found this handy and cheap enough…
For those who want to add CAN bus to their Rook here is a handle mount that fits under the rook.
A case for Waveshare RP2040 Zero with the possibilty to glue in a 2pin jumper connector, meant to be used as a temperature sensor inside a pc. https://github.com/Ranatos/RP2040-Zero-liquid-temperature-sensor
I acquired my GoalZero secondhand and while using it in the summer I noticed that the buttons kept falling into the case. Each of these buttons has an arm looped over a single stem on the front plate with no endcap. One of the connector…
As you might have noticed on the Sovol zero, the part of the reverse bowden that's inside the enclusure can get quite bended due to the rigid entrance point. While not a major issue most of the time, a more compliant path could prove…
This case was designed to hold a Raspberry Pi Zero 2w and v1 camera but still allow access to the headers and all the ports because I could not find one anywhere. It should still hold an original Raspberry Pi Zero and a v1, v2, or v3…
Hardware needed : x4 12-14mm M2 screws to secure bottom plate x6 mechanical switches of your choice x1 RP2040-Zero microcontroller x1 8-bit RGB LED x4 10mm rubber pad 30AWG Wrapping Wire Solder iron Transparent Double Sided Polyester Tape…
This is a simple case for the Nibble Zero . It features compliant covers for the 6 side buttons, as well as the boot and reset switches. A cutout is provided for an antenna, as well as for the side GPIO to connect to a flipper. It was…
There are two different mount versions for printing in TPU and hard plastics (ABS/PETG/PLA etc.). The difference is the cutout on one side of the mount. You can not fit TPU version if it is made of hard plastic because of goggle's…
Print from at least PETG preferably ABS/ASA BOM: 2x BHCS M3x6 - to mount Klipper expander 2x M3x8/6 Plastic screws - to attach the print to printer If you have trouble compiling firmware for it, commenting out 2 lines fixed issues that I…
Overview This is a modular, snap-together curtain rail system designed specifically to eliminate light gaps. Unlike standard rails, this system includes integrated side-shields to block light from "leaking" over the top and sides of the…
I made a fan top hat for Ebn0's PSU cover. I also made a remix that uses 4x 5010 fans underneath.
This is not an elaborate model, I designed it for a little boy I know who enjoys mowers. He enjoys it, that's all that matters. The model is printed as one piece. The wheels and swivels are functional after a print, though might be a…
The hole on the female pin is 7.81 mm wide and 26.3 mm deep. Made the pin shaft slighly undersized and 10 mm long and affixed with 2 part epoxy.
Extra Materials : 4x M3x6 Heat Set Inserts. 4x M3x6 Socket Head Screws
I really liked the Joker canopy on my analog whoops so i remixed them. New versions for the HDzero Eco and HDzero Lux cam. Lightweigt , Eco version printed in tpu95A is 0,7 gr the lux version is a little bit more. Adjustable angles ,…
I wanted a simple Design for my Orange PI Zero 2W that included space for a USB Hub and an Mini to Full size HDMI adapter. (it is built around parts i had on Hand) (Pictures are from my first draft. I needed to redesign the HDMI port)…
The original model allowed the antenna to flop out and I wanted the antenna to stay internally, so I modified the design to fully encapsulate it. The added fins are to make it able to take more force since it needs to be printed…
Hi, Simple case for Raspberry Pi Zero 2W. I recently bought a 3D printer and this is one of my first models. I started learning how to draw models in FreeCAD, as you can see this is the result of my work so far. I hope it will be useful…
Updated to support standard PI hat standoffs and better threaded screw in support. Suggest doing a dry run screw test before assembling just to clear the threaded holes which makes it easier when you try to screw in with the case and hat…
A larger adjustment knob for the Eureka Mignon Zero that is easier to read and far more precise and repeatable than the stock knob. Printable without AMS via manual filament changes. This remixed version has wider tick marks and numbers…
I designed this to be an easy to print and to install camera mount for the ZeroG Mercury One.1 3D Printer. On my Ender 5 Pro based mod this is supposed to fit up to a 275mm bed size. Though I don't own one, I expect on an Ender 5 Plus…
This motor plate allows use of a standard BMG 50t extruder gear to drive the front z-belts instead of 3d printing / mods. Parts needed, standard bearings and a BMG 50t gear. 4 heat set inserts Nema 14 Pancake motor Front motor mounts…
As you may have noticed, the Sovol Zero has an issue where the floppy umbilical cable that goes to the toolhead falls low and prevent proper homing resulting in an errror and alot of unpleasant noises. Some simple solutions exists such as…
The magnets are in slightly different positions in the DB zeroclick cowl compared to the ZeroClick probes magnet position. (This might be because of the ZC probe versions are not followed through on the DB github.) I was afraid it will…
This is for the ZeroLemon mag safe chargers. I couldnt find a stand that would fit them so I made this simple stand. There is a fit check to print out first to make sure your charger fits. Mine is 2.2 inches or 55.9mm diameter.
When feeding filament from above and not using the reverse Bowden tube, there is no PTFE tube supporting the extruder cable, allowing it to droop down, where it can drag over the printed part or more often, get caught between the gantry…
You'll need 2X inner and 2X outer pieces. Note the inner pieces are NOT the same. One (0.1) is slightly larger. Tested with ABS with 0.4mm nozzle and 0.2mm layer height, worked fine but needed tangs. Finalized with PETG 0.6mm nozzle and…
This is a simple case for the Nibble Zero . It features compliant covers for the 6 side buttons, as well as the boot and reset switches. A mounting hole for a female SMA pigtail is provided, as well as a slot for the side GPIO to connect…
Stylish catchall tray inspired by the iconic rivalry between Sub-Zero and Scorpion.
Initally i had planned to cut a hole into the backplate and mount a 120mm fan but now i went a less destructive way the mount can be fixed with one M3x5 (theres already one whole in the frame) and then this fan…
A set of magnetically mounted external insulation panels for the Sovol Zero door. Requires removing the hinge and door handle screws to fit the mounting pads. For the hinges you will need to replace the 4 screws with new longer M3 bolts.…
한개의 wifi 카드만 사용한 VRX 케이스 입니다.
Following the example of the original author, I've posted the STEP file in addition to the 3MF and STL versions. I'm going to be using mine for not only coaster etching but also PCB prototyping. I'll probably make a version with…
