Bjorn Enclosure for Pi Zero 2 W + Inland e-Ink Display
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Alternative enclosure for Bjorn CyberViking w/ Inland e-ink/e-paper display module
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 2
- Makes
- 0
- Views
- 91
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
There are other enclosures / cases meant for different e-ink/e-paper displays. The only thing special about this one is that it is meant to fit the Inland (Microcenter) e-ink display module, and a Pi Zero 2 W with a 40-pin header.
Connection between pi pin-header and the e-ink module can be done with wire-wrap wires, or similar. There isn't room for a typical pin-header cable. See photo.
For info about setting up Bjorn, go here.
For help clearing the e-Paper/e-Ink display before shutting down the Bjorn gadget (to avoid burn-in/damage), see this.