1 / 4
Bjorn Enclosure for Pi Zero 2 W + Inland e-Ink Display — zdjęcie 1
1 / 4

Bjorn Enclosure for Pi Zero 2 W + Inland e-Ink Display

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Alternative enclosure for Bjorn CyberViking w/ Inland e-ink/e-paper display module

Ocena
0 / 5
Polubienia
2
Pobrania
2
Wydruki
0
Wyświetlenia
91
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial

There are other enclosures / cases meant for different e-ink/e-paper displays.  The only thing special about this one is that it is meant to fit the Inland (Microcenter) e-ink display module, and a Pi Zero 2 W with a 40-pin header.

Connection between pi pin-header and the e-ink module can be done with wire-wrap wires, or similar.  There isn't room for a typical pin-header cable.  See photo.

For info about setting up Bjorn, go here.

For help clearing the e-Paper/e-Ink display before shutting down the Bjorn gadget (to avoid burn-in/damage), see this.

Tagi