P
Printablespictorf
PiZeroW casing
A small casing for PiZeroW, but with openings for power, USB, DVI, SD card andPiCam.
Wydruk około 0,64 €–0,78 € nettoWstępna wycena jednego wariantu
- Pobrania
- 30
- Polubienia
- 6
- Ocena
- 5
Wyniki wyszukiwania: pizero
Liczymy pasujące modele…
P
Printables
PicoNES for RP2040-PiZero
Case designed for the PicoNES software along with the Waveshare RP2040-PiZero. PicoNES software and plenty of great information can be found here: https://github.com/fhoedemakers/pico-infonesPlus note theres also a SMS emulator (and GB…
P
Printables
PiZero octopi arm and mount
This is a super simple set of parts to mount a pi zero pointed at your machine for octoprint. Parts print without support and I just use nylon standoffs to mount the pi and whatever screws I have lying around to mount it to my work bench.
P
Printables
another box piZero & inkyPhat
This is a new remix of my old box for Pi Zero and InkyPhat whitout any image
P
Printables
Rhasspy / Wyoming Satellite Round Case / PiZero 2W + ReSpeaker 2Mic + large speaker
This is a simple case to house a RPi Zero2W with ReSpeaker 2Mic-HAT and a speaker with similiar size to the Pi (I use this https://cdn.shopify.com/s/files/1/1509/1638/files/Speaker_mini_3W_datasheet.pdf?v=1646837386 ). //Update…
P
Printables
Ridgid Einsy Case | Reversed, Covered Wires, MMU2S, More Airflow, Hole For LEDs, PiZero2 Frame, Clears X Axis
Will flesh out a better description later. Added hexagon mesh to base to look cooler. Added small hole on top for DC wire to power led lights. Remixed Pi Zero cover to have hexagon mesh. Fixed thin walls in top of base (around where…
P
Printables
PiZero-Cooler
Cooler for my Raspberry Pi Zero 2w Dosbian3 Project (Master of Orion 2): 30x30 Fan, 3V/5V O-Rings Uhu-Hart Communitypatch: https://moo2mod.com/ Dosgaming: https://dos.zone/ Put the Gamefolder (moo2) into your Dosbian Gamefolder…
P
Printables
PiZero Vertical Screwless Camera Housings Prusa MMU edition
Just a coloured remix of PiZero Vertical Screwless Camera Housings by gowen with PRUSA logo for MMU. Print instructions Category: Camera
P
Printables
PiZeroIRCase
I built this model for a project that required adding an IR receiver to a Raspberry Pi Zero. The slot in the front of the case will accept a TSOP382 IR receiver module with the leads bent back at a right angle. The case bottom accepts 4…
P
Printables
Pi Zero / Zero2w / OrangePiZero2W - 1U Rack Mount
Fits 1U, 3mm holes for standoffs. 2-3 Walls, 15-20% Infill.
P
Printables
Epic Pwnagotchi Case for PiZero + WaveShare V4 eink screen
Tested with a Pi Zero 2WH And Waveshare 2.13 inch V4 eink screen (supports Pi Zero WH, Waveshare v3 as well) Check out my Pwnagotchi guide and plugins too How to Use: First, remove the microSD card from the Pi Zero, then attach the pi…
P
Printables
OrangePiZero3_Base_StandardHex_wallmount
OrangePiZero3 wall mounts. Remix from https://www.printables.com/model/542569-orange-pi-zero-3-case.
P
Printables
PiZero Base
An ultra minimalistic case for a Raspberry Pi Zero or Pi Zero HATs Snap or screw a Pi zero onto it so you can use it for prototyping or use it to stick a Pi to a project. Category: Electronics
P
Printables
MMDVM_HS_HAT case for Pizero2W
Items needed: 4 M3x4x5 heated inserts 4 M3x30mm 2.5 hex bolts 4 Printed spacers (included in files) Also included solidworks files for those capable and able to modify as you wish. :D I used ABS (recommended or similar)
P
Printables
PiZero Vertical Screwless Camera Housings GPIO remix
Remix of PiZero Vertical Screwless Camera Housings by gowen with cutouts for GPIO. I used a pi zero model to cut the minimum amount of area required to make gpio accessible, at least as much as possible. The only suggestion would be to…
P
Printables
PiZero (OctoPi) Camera mount for Monoprice/Wanhao Maker Select i3 V2
I wanted a stable mount for my PiZero/OctoPi setup that would easily mount to my Monoprice Maker Select V2, and nothing out there quite fit the bill, so I took a few designs that I liked, and fused them together into this great mount.…
P
Printables
Voron Trident Orangepizero2 DIN Adapter Bracket
If you're tired of raspi scalpers and decided to go for an orangepizero2 on your voron build, you're in luck! This bracket adapter replaces the one file that was made for the raspberry pi adapter, meaning you can still use the lower part…
P
Printables
PiZero and USB Ethernet Lan Case - PiHole
Simple casing for a USB to LAN dongle and a Raspberry Pi Zero. To make sure everything fits within the box, I soldered a micro USB cord to the lan dongle. There is no need for a separate power adapter because the raspberry pi can be…
P
Printables
RpiZeroCase with 6mm magnets
Thanks qubit01 for this great Design in OpenSCAD. So far I only made designs in Tinkercad and then in Fusion360. Since my PC is running mainly Linux and I didn't want to load windows I tried to use OpenScad. qubit01 has made the…
P
Printables
Duino-coin AVR 5 nano case and 4 picos 1 piZero w
This is a 3 piece case that hold 5 nanos for and 4 Picos and a PiZero as a host. Case is press together and tight fit. Send me some Duco--> Lwkalis Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: No Resolution:…
P
Printables
PiZero Screwless Camera Housing for wide angle lense
remixed this awesome case to fit the wide angle camera lens for the raspberry pi. unscrew the lens to install the camera..then screw it back in to hold in place Category: Camera
P
Printables
PiZero Webcam
I needed a webcam and had a Raspberry Pi Zero and a couple of camera modules. Using "Show-me Webcam" you can covert a PiZero into a USB webcam. Hardware Raspberry Pi Zero ≥64MB SD Card ZeroCam FishEye…
P
Printables
Vyper PiZero
RaspberryPi Zero W/W2 case that mounts to Anycubic Vyper 3D Printer via built in DIN Rails.
P
Printables
PiZero Vertical Camera Housing rotating & 40x40 drawer compatible
This is a remix of 2 designs: PiZero Vertical Screwless Camera Housings by gowen August 08, 2016 Ender3 40x40AL Drawer (drawer to fit inside a 40x40 aluminum) by Edison13 February 10, 2019 // for some reason I cannot attribute both…
P
Printables
Case for Pizero2w with RJ45 pogo hat Sidewinder X2
Remix of the only case i found for the pi ZERO 2W with pogo hat RJ45. https://fr.aliexpress.com/item/1005003433746408.html?spm=a2g0o.order_list.order_list_main.17.360d5e5bcuYKy2&gatewayAdapt=glo2fra I made a remix to be fixe onSidewinder…
P
Printables
PiZeroMount
Here's a Raspberry Pi Zero mount so that you can mount it to something else! Since nobody else had made one I had to design it! Because I had a project in mind that I needed the use for it! It's a tight fit but it will get in and be…
P
Printables
PiZero Case lid with cutout for CPU heatsink
Lid for PiZero Case with cutout for heatsink. Printed with Prusament rPLA, 4 perimeters and 20% honeycomb infill.
P
Printables
PiZeroCase with added mount M5 machine screw
PiZeroCase with added mount M5 machine screw. Removed logo from lid.