BFI Double helical Gear Mod (Beefy Front Idler)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy synchronization of bfi via double helical gear
- Ocena
- 5 / 5
- Polubienia
- 87
- Pobrania
- 261
- Wydruki
- 2
- Wyświetlenia
- 2869
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Double Helical Gear Mod on BFI (Beefy Front Idler)
It has been modified based on Diyshift's BFI Gears user mode
I made it to deliver better torque and prevent it from being twisted than normal gear
The single-helical gear was found to cause thrust and become twisted, making it double-helical
In my experience, it's very stable
The tolerance between gears is not large
You need a well-calibrated printer
Printers with 0.1 to 0.2 mm tolerances
Seamline guide are modeled to prevent eccentricity
Make sure to arrange the seam there
The cover is about 0.5mm thinner than the original bfi
Use washers to reduce wear and tear
The explanation may be strange due to the use of a translator.🥲