1 / 3
MTB Rear Derailleur Jockey Wheel - 11 tooth — zdjęcie 1
1 / 3

MTB Rear Derailleur Jockey Wheel - 11 tooth

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement jockey wheels to suit most rear derailleur brands.

Ocena
0 / 5
Polubienia
33
Pobrania
198
Wydruki
0
Wyświetlenia
1069
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

The jockey wheel is designed around a 19mm (O/D Dia.) x 7mm (I/D Dia.) x 6mm (W) sealed ceramic cartridge bearing. See the link below. The bearing is also used in other brands of jockey wheels. The bearing is pressed in position, and a lip retains them on one side of the bore.

Recommend print height 0.15mm (Quality), 100% infill and support material required. Some fettling will be necessary to smooth the underside of the printed part. 

I have printed these in PLA and PTG and tested them for a summer riding season, and they have not been worn excessively during this time.

https://www.sjscycles.co.uk/bearings/wheels-manufacturing-ceramic-sealed-cartridge-bearing-607-7-mm-inner-19-mm-outer-6-mm-width/