1 / 3
MTB Rear Derailleur Jockey Wheel - 11 tooth — image 1
1 / 3

MTB Rear Derailleur Jockey Wheel - 11 tooth

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Replacement jockey wheels to suit most rear derailleur brands.

Rating
0 / 5
Likes
33
Downloads
198
Makes
0
Views
1,069
Reviews
0

Updated at source:

Model information

License
Creative Commons — Public Domain

The jockey wheel is designed around a 19mm (O/D Dia.) x 7mm (I/D Dia.) x 6mm (W) sealed ceramic cartridge bearing. See the link below. The bearing is also used in other brands of jockey wheels. The bearing is pressed in position, and a lip retains them on one side of the bore.

Recommend print height 0.15mm (Quality), 100% infill and support material required. Some fettling will be necessary to smooth the underside of the printed part. 

I have printed these in PLA and PTG and tested them for a summer riding season, and they have not been worn excessively during this time.

https://www.sjscycles.co.uk/bearings/wheels-manufacturing-ceramic-sealed-cartridge-bearing-607-7-mm-inner-19-mm-outer-6-mm-width/