Vevor Rotory Tool Foot Pedal control to Table Top Hand Control Mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I saw this on another site and thought it was a good idea, but it fit the Foredom pedal but not the VEVOR pedal.
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 14
- Wydruki
- 1
- Wyświetlenia
- 240
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Mod to use a Vevor foot pedal (the type that comes with the one you buy on Amazon) as a hand controller on top of your desk. Allows for more control over the speed.
Parts needed:
1 - 6m x 45 mm screw
3 - 6m nuts
2 6m star washer (lock type)
1 - 4m x 16 mm screw
1 - 4 mm nut
1 - 4 mm flat washer (you can reuse the one that comes off the screw on the pedal)
Don't crank down on the screw that holds the lid to the bottom box, just snug is good.
Two of the 6m nuts go in the knob to keep it straight, put one on and turn the knob a few times and the put the second nut in.
I printed at .25
and 30% fill PETG
You can try what works for you.