Liczymy pasujące modele…
Card Slinger 3.0 for MTG / ManaBox App- Easily scan in bulk quantities of cards by hand - Now for sleeved and un-sleeved cards You MUST print the base and insert in transparent or white filament, it will not work properly otherwise.…
No job too big or too small for these totally unnecessary tiny helping hands. Suggested by a colleague, convinced the idea will make him rich beyond his wildest dreams, he has a big plan to expand the range and make these tiny little duke…
Ich habe dieses Handrad für meine Warmwasserheizung konstruiert, gedruckt und montiert. Print Settings Rafts: No Supports: No **Resolution:** 0,2 mm Infill: 25 % Weitere Designs siehe auch / have a look for more…
For the leg mounted stabilizer bowl, use any one inch nylon velcro strap. Here is a link to one below: https://www.amazon.com/dp/B0B567TCHF If you would like me to print one for you, check out these links:…
About I used hole in the doors of the Original Prusa MINI Enclosure as an entry point for filament PTFE tube. Moved handle for fingers a bit lower, and added magnetic coupler in there for s 6x2mm magnets, which are popular in gridfinity…
This handle has more space then the original with a rounded section for the fingers.
A drilling guide for door handles. It's slightly parametric. Here is the link to the Onshape project:…
The SHTI (Simple Handled Thermal Imager) found on Amazon HERE (not affiliated, I don't make money from this link) comes as a bare circuit board. I made a basic housing to protect it. It includes an optional lens guard that can be glued…
I made this because my son temporarily lost the handle to my keyboard brush that I use for lots of things (great for cleaning electric shaver). Printed with a brim, no supports, uses around 15g.
Ich habe dieses Handrad für meine Warmwasserheizung konstruiert, gedruckt und montiert. Print Settings Rafts: No Supports: No **Resolution:** 0,2 mm Infill: 25 % Weitere Designs siehe auch / have a look for more…
Handles for Skånska Byggvaror Outdoor parts Intended to sit on the inside of lot with fitted outside original handle. With the handle, you get a grip to push the part from the inside. The handle does not prevent the parts from being…
Standard D6 (six-sided) gaming dice in a left hand layout. The left hand layout is slightly different from the more common right layout, which you can easily tell by looking at the relative positions of the 4, 5, and 6. The files included…
Give some extra color to your bike with these dual color handlebar plugs. These plugs have total diameter of 32mm so they match better with lock on or really thick grips. Thanks to Single - Extruder Dual - Color technique, you don't need…
Handtuch Halter Wandhaken für Alfer coaxis-Schiene https://www.globus-baumarkt.de/p/coaxis-profil-breit-1-m-60-x-10-mm-aluminium-roh-blank-0763201008/…
Hier mein Grobhandtaster ESP Geheuse ich nutze den Taster für lustige Moderation Momente um Musik oder Videos auszulösen als Quizshow Buzzer kam der auch bereits zum Einsatz der Kreativität sind keine grenzen gesetzt was man damit alles…
Handtuchhalter welcher zum Kleben mit Silikon an Fließen geeignet ist. Er wird mit einem 18mm Rohr bestückt was eine gängige Größe einer Wasserleitung ist.
This is designed to have an 8mm x 4mm round magnet inserted in the center. This handle should feel like the new Citadel painting handle for small models, however I designed it to work with bigger hands. This handle will work great with…
I previously remixed another users door handle to mount in the bottom panel to lift and access the electronics bay. It was kind of chunky and the insert didn’t fit well so I finally got around to making a new one. I put the logos that…
Like the LP2 and LP3, the LP4 has a sturdy handle on the laser head for transportation and handheld engraving. However, due to its weight and the loosely attached magnetic protective cone, it doesn't stand on the cone without the electric…
WIP - the handle is maybe 0.2mm too long over it's entire length, and there's not enough margin on the “boltway” parts: I cracked my handle slightly while putting them in. But it fit on line, so I probably will not fix this model, unless…
Ever wanted to use your uConsole while lazing around? I did. I bought the uConsole to develop small games and demos while lazing in bed after the kids were asleep. I promptly started dropping it on my face alot. This is version 3,…
*2024/10/14 Added a skeleton version for better sight.
This is a clip for rockshox shock pump handle. TO install it, you only need a ziptie to hold it in place.
Wanted a stand for the hex set from teng. The set has 2.5mm to 8 mm – but I also have separate 2, 10 and 12mm wrenches. The first version has a slightly loose tolerence on the joints between parts - so I uploaded a second copy with a…
Use with caution! I do not guarantee this brake to work for every motorcycle, and it should not be regarded as an extra safety, just a fun model!
You need: 4 x screw or velcro tape. Good luck ;-)
I liked the look of the StarSaber and didn't want to buy one, So here we go.
I created a model of this handle to replace a broken handle in my toolbox. You need 2x ϕ3mm pins to assembly it.
Handle for The T1/Pro The uploaded orientation is intended to have a clean, visible surface, but of course, it can also be printed differently without supports. Unfortunately, my printer didn’t come with a handle, so I quickly created my…
Made this for my mother and her Bible study friends for Christmas. You can download the stand here. https://www.printables.com/model/1063406-sign-stand Updates January 27/25 - Updated files and Printer Settings Printer Settings…
The countersinked hole is for the wood screw The other one is for attaching handle to cabinet door. 15 mm dowel fits in this one! (if its 14 mm no big fuzz) 20 % infill No support Print standing position Pre drill hole into wood dowel…
Voici 2 versions de poignées pour s'adapter aux 2 tailles de tiroir permettant un retrait sans se bruler des 2 moules en silicone. Impression en ASA conseillée Here are 2 versions of handles to adapt to the 2 drawer sizes allowing removal…
I am looking for a practical and innovative solution for my Wolfcraft drill chuck ease to use with hand in vaious DIY projects. This unique 3D model handle is specifically designed to be easy and confortable. U can use any material and…
This is a robust handle for the QBone board. It helps getting the board in and out of the backplane. These are usually found on Dual-size PCB boards, but here applied to a Quad-size PCB. Boards like these are found in DEC PDP-8 or PDP-8…
With just some nylon threads, 6 motors, and an Arduino, you can build your own hand. I'm also sharing the code. It’s more of an aesthetic solution, and it's also intended for robots. Here in action: When printing the fingers, set the…
simple 12mm thick spacer for wall mounting hand sanitizer units so you can still access the buttons for bottle replacement. Spaces the back side of the sanitizer off the wall when you have have trim or door frames on either/both sides.…
Dummy 13 needed it's own phone to take selfies of it's poses. You'll want to use Tree supports for the hand. Clean them out and a very light brush with a file might be needed. Then the phone should slide right into place. All print…
A handle and latch replacement for Frigidaire's mini fridge, model FFPE4533UM. Modeled after the stock handle and latch plate. Includes a high and low latch panel if the fit isn't correct. Does NOT include the tooth column that sets…
It's hard in the U.S. to find a Singer 201 without a potted motor. This allows a reproduction hand crank to be fitted. The magnets are ¼" cubes. Put a single layer of masking tape between the adapter and the wheel with the adhesive side…
We wanted a cookie cutter to make hand turkey cookies, and so we took a photo and modeled one after TwirlyGrl's hand. We included a version with or without the handle. We printed at .2 layer height Wait until fully cooled to remove from…
Ich habe in meinem Skoda Fabia II lange etwas vermisst und es hat mich etwas gestört. Leider war ich erst jetzt mit dem 3d Drucker und etwas 3d Modellierungs Kenntnissen in der Lage das Problem anzugehen: Es fehlt eine Smartphoneablage.…
Das Modell ist für die Druckplatte ausgerichtet. Ohne Stützen, mit 3 Wänden, Schichthöhe 0,15 oder kleiner und die Füllung 30 Prozent. Das zweite Model ist durch das eindrücken eines Filamentfadens optisch sehr interessant.
I broke the handle on my MK Krøger H40 caulking gun (excellent tool, highly recommended!). This is a direct replacement , as I couldn't find a spare part available. Printing Orientation flat, with supports for the holes. 0.6mm nozzle and…
Das Modell ist für die Druckplatte ausgerichtet. Ohne Stützen, mit 3 Wänden, Schichthöhe 0,15 oder kleiner und die Füllung 30 Prozent. Das zweite Model ist durch das eindrücken eines Filamentfadens optisch sehr interessant.
A few cookie cutters in a police theme. Handcuff and pistol. Added two files with thicker cutter calls
I designed this as often when I lay in bed, I don't have the energy to hold the book that I am reading with two hands thus, this object allows you to hold a book with one hand.
A simple replacement for a broken broom handle cap for sticks with a diameter of 21.5 mm. It is printed with Fiberlogy Fiberflex 40D, which is a bit tricky. No support was used, but an outerbrim of 3 mm to make sure that the object is…
Oxlam handheld vacuum adapter allows for attachment of smaller tools. I can now use the inflation tools to vacuum fuzzy bits out of my sewing machine.
Welcome! Welcome to Revision 3 of my versatile, DIY helping hands! These models were entirely reworked for improved flexibility, fewer fasteners, and enhanced functionality. It is not compatible with previous revisions but offers a more…
This is a simple and functional 3D-printed holder designed specifically for the ZWO AM3, AM5, and AM5N hand controllers. The holder attaches securely to tripod legs with a 4 cm diameter, with a 38 mm inner diameter ensuring a snug and…
Volvo XC90 Folding Folding Seat Latch Release Handle (Rear, Interior code: RXXX, RXXX). Volvo original PNs: 39826799 ; 39826801 Two files, with and without Volvo logo available. If printed in high strength material (PETG, PCTG, PCCF etc),…
DWX grip (Shadow 2) for Ace VR. Barrel/Slide is generic 2011 slide but it is close to the DWX. Could be remixed/cleaned up to be more accurate, but I just wanted something close for a fellow ACE VR user. THIS DOES NOT REPLACE THE ACE FCU…
Mount for garmin edge devices that clamps on to 35mm handlebars and sits in the middle over the stem. Very durable and won't rotate or break even on the roughest downhill tracks. The top clamp (blue in the photo) is designed to break in a…
I needed to replace a broken handle on an old wooden window. I figure that it's faster to just design it and print it out than try to find a replacement. It worked out!
Maniglia per lo smontaggio dei perni di accoppiamento per estrusori Prusa XL PETG
Quick remix to allow to mount SPN-120 Nippers to your HSW
Kyocera Knife Replacement Handle - for small Ceramic Knife (all Purpose) of GEN series and probably NATURAL series as well, mine was the 13cm Blade.
Hi This is a Bicycle handlebar end caps. Printed in Flex (Flexfill 98A Filament)
I brought a second hand dishwasher and the handle was missing from the cutlery wash basket, so I created a new one in fusion. I had to split it in half as my build plate wasn't big enough but included the whole one in case yours is. My…
EN You can size it to suit your needs The hole can be enlarged or reshaped directly in your slicer using a negative volume. It can be hot-swaged or glued, depending on preference. No support 6 Perimeter anywhere Voilà FR Vous pouvez le…
The simple ergonomic triangular pencil grip helps individuals of all ages (right-handed and left-handed) guide the hand into a comfortable position that helps relieve hand pain, reduce fatigue, and improve comfort while writing or…
This is a simple pointer that fits nicely onto a technics axle. I use it with a gear reduction and limit switch to test automation projects.
Fridge handle broke, oh no! Not really sure which refrigerators these would be compatible with but if your handle looks like this one maybe it will fit your needs, it seems from some cursory online research most Frigidaire refrigerators…
This was sort of inspired by the terminator T-1000 from Terminator Judgement Day, and Bumblebees knife hands from Transformers 1. For print settings: I would recommend a .08mm layer height (or however fine your printer can handle). Yes…
This is a quick practical print solution to a problem I was having. My partner loves these flexible laundry baskets, but we find that after some use, the handles often split, making them difficult to carry around. We didn't want to buy…
NEW FOR QUEST 3S! Quest 3 version here: https://www.printables.com/model/933285-oculus-meta-quest-3-stand-with-carrying-handle-for This is an Oculus Quest stand to be used when your Quest is not in use, and meant to facilitate easy…
I needed a better way to hold hem when using my allen hex keys. Stumbeled on these , all credits go to Uncle Frank says for designing the handles. Had a Skadis board but no holder for the printed handles. So I “designed” one. I only have…
Replacement for broken Beko Freezer handle (must be connected and glued together) Náhrada za zlomené držadlo mrazáku Beko (nutno spojit a slepit)
Sparklers are a great way for children to take part in the fireworks on New Year's Eve. Although they are not dangerous, many children have respect for sparklers and find it very difficult to hold the thin wire. With this quick and…
Woodford Model 17 Sillcock handle. Included the .blend file. Category: Replacement Parts
My mom wanted a hand held citrus squeezer and she could find someone nearby that sells it so i made this model and it works great and easy to use Printed it without supports
I've tested the model and 2 adapters with the following brands and types Adapter V1: Nivea stick, Dove men's stick, Rexona men's stick, Arm and Hammer stick deodorant Adapter V2: Mitchum Gel deodorant (all 96g versions), Speed stick (76g…
Designed to fit the printed version of my ‘The Hand Of Iguanodon’ model ( https://www.printables.com/model/982092-the-hand-of-iguanodon ). The pose was chosen by me by examining a number of reference mounts found online, and by attempting…
Welcome! Welcome to Revision 3 of my versatile, DIY helping hands. I reworked the CAD, allowed for more fasteners, and added new clamps. Every part changed some. You can find an up-to-date list of SuperMod designs here:…
Futuristic Design Handles - Maniglie design futuristico Overall dimensions: 105x240x45mm Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thks
Furniture Handle with a hole distance of 32mm. I printed it with PETG-CF.
A holder for deburring tool blades. The handle I had allowed the blade to rotate, which is great for deburring tools but inconvenient for deburring edges of parts, which is primarily what I use these tools for. This handle is designed…
Print the handle in PLA and the stamps using any flexible material, like TPU. Each can be printed without support with the connector pattern facing down.
Handle for screws. 100x20mm Has a hole for a 5x3.5mm magnet If you wish, you can add fuzzy skin to the outer perimeter
Yeah, you could buy one… but why not print it? This spinner is my new desktop fidgeting toy, it spins so well! The secret…? 6mm airsoft bb's. (ok, ok, I know it's technically cheating but they work so good! Let's just call it a Hybrid) I…
This model is compatible with the lego system.
This is designed to use ¼" shank bits by epoxy gluing them into the handle. You can print a bunch of them and glue in different types and sizes of bits to each one, or do what I did and print just one and glue in a magnetic bit holder.…
Ручка ящика комода. Расстояние между центрами отверстий 125 мм, диаметр отверстий 3,5 мм. Крепление саморезами. @Печать с опорами
When printing, I used a layer thickness of 0.16 and 15% fill. Printed on Creality Ender 3 V3 SE.
This is a wall mount for Bosch hand blenders. Print from PETG for it to be strong enough to withstand kitchen use. If you would print this from PLA, the layer adhesion would cause it to fail. PETG does not have this problem.
You will find here a handle model for bedroom, office, or other drawer units. A small inscription 'PRUSA RESEARCH' is engraved on it.
I found it awkward to use the knife in my left hand, as the springs doesn't work correctly when you touch them. It is based on the "negative hook for better catch - guided" files. Basically just mirrored everything except for the makers…
Grave with realistic hands sticking out .. spooky.. ✋🤚👻 Print it however you would like.
Hello there, I made this handle for my daughter since the original IKEA handle broke. She painted hers with melted cryons but whatever method is fine. Its easy to print and it works fine so far. The hole distance is 128mm.
