1 / 5
Earring and Jewelry Rack and Tray for Storage — zdjęcie 1
1 / 5

Earring and Jewelry Rack and Tray for Storage

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A jewelry rack that is useful for storage of earrings, studs, rings and the like.

Ocena
5 / 5
Polubienia
45
Pobrania
259
Wydruki
1
Wyświetlenia
1100
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial

PRINTING INSTRUCTIONS

I printed the base upright without supports. Print Rack Base at a slower speed to reduce wobbling along the higher portions of the sides. I had better results tuning my retraction settings and temperature to help with stringing while traveling up the sides.

You could possibly even print the base on it's side with supports painted on.

Print Rod with 100% infill and add supports for the underside.
Print Hangers at 100% infill.
I would print the Rack with at least 20% infill to add weight at the bottom and lower center of gravity.

THANKS FOR VIEWING MY MODEL

Rack A has 3 equal sized trays.
Rack B has 3 trays, but the middle one is larger.
Rack C has 1 large tray.

The Pegboard-Style walls allow you to place studs into them and the Hoop Holders slide into the pegboard to allow you to hang large hoops off the side, as they might not fit well on the hangers.

I printed a similar rack for my partner, but I did not like the way it turned out so I made my own model.


If you have any questions, send me a message.
Please post makes if you print it, I would love to see them!

Tagi