1 / 5
Earring and Jewelry Rack and Tray for Storage — image 1
1 / 5

Earring and Jewelry Rack and Tray for Storage

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A jewelry rack that is useful for storage of earrings, studs, rings and the like.

Rating
5 / 5
Likes
45
Downloads
259
Makes
1
Views
1,100
Reviews
1

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Noncommercial

PRINTING INSTRUCTIONS

I printed the base upright without supports. Print Rack Base at a slower speed to reduce wobbling along the higher portions of the sides. I had better results tuning my retraction settings and temperature to help with stringing while traveling up the sides.

You could possibly even print the base on it's side with supports painted on.

Print Rod with 100% infill and add supports for the underside.
Print Hangers at 100% infill.
I would print the Rack with at least 20% infill to add weight at the bottom and lower center of gravity.

THANKS FOR VIEWING MY MODEL

Rack A has 3 equal sized trays.
Rack B has 3 trays, but the middle one is larger.
Rack C has 1 large tray.

The Pegboard-Style walls allow you to place studs into them and the Hoop Holders slide into the pegboard to allow you to hang large hoops off the side, as they might not fit well on the hangers.

I printed a similar rack for my partner, but I did not like the way it turned out so I made my own model.


If you have any questions, send me a message.
Please post makes if you print it, I would love to see them!

Tags