Phone Hanger (parametric)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Looking for a phone hanger for your bed headboard? This is for you!
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 120
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Reaching the phone on the night stand was painful because mine are too low, so I needed a different place to keep it, light on my bed headboard.
Adjustments
Since every phone is different, I'm sharing the Fusion360 project file so you adjust all parameters to adapt it.
How to print it
The model is made to be printed on the “closed” side (this direction is the fastest for printing). To make sure it stays “glued” to the printing plate (since it can be very tall), there are some extra pieces that, after printing, you snaps away. Take a look at the slicer screenshot up here.
Also, the model is made to have the phone cable on the right side, but if you want the cable on the left you simply mirror it directly on the slicer place.
Finally, regular PLA is enough.